|
1. Turn on DSO8060.
2. Switch DSO to signal source status.
3. Connect DSO to PC by a USB cable.
4. Open the software on PC.
5. Click in the menu to open a signal source operation window. See below picture.
6. Press in the toolbar of signal source window to open following device option window.
7. Select the device you want to open and click “OK”.
8. Click in the signal source window toolbar to connect DSO to PC.
9. Click in toolboor to enter into the arbitrary waveform edition interface.
10. Zoom in/out the editable waveforms by clicking button.
11. Dragging the editable waveforms by press mouse left constantly.
12. Output the signals to other oscilloscope by a BNC connecting cable, and you can observe the same waveforms on the other oscilloscope.
|
This post contains more resources
You have to Login for download or view attachment(s). No Account? Register
x
|