6254BD program does not run in Windows

gold · Post time 2022-8-1 03:40:04

i haven't fixed it yet
I want to buy two more of the same oscilloscope.
but AS is difficult and hesitating.

brussl1 · Post time 2022-7-29 06:02:37

I see that red led blink. in device manager have a device . When start program it do not start, but if disconnect the program appear. If again connect device , program still on Searching Device....

brussl1 · Post time 2022-7-29 05:29:39

Hello. I have absolutly the same problem. How to repair it?

gold · Post time 2022-7-16 19:20:02

Edited by gold at 2022-7-16 19:26

Scope connect PC --> Driver recognized at Windows --> Open Software ( DSO6000 ) ==> Result : Software does not run ( Software windows not visible )

Scope connect PC --> Driver recognized at Windows --> Open Software ( DSO6000 ) --> Software does not run --> disconnect socpe and pc --> Result : Software running ( Software window appears ) - (1)

(1) --> Scope connect PC ==> Result : Software Windows Visible but Scope not Working ( attached Picture )

Jing · Post time 2022-7-12 19:25:10

Dear Sir，
Please open the software after connecting to the machine. Then re-plug the USB to see if the machine can connect?

6254BD program does not run in Windows

This post contains more resources

Viewed forums