Please select To the mobile version | Continue to access the desktop computer version

Electronic Engineer Discuss

View: 414|Reply: 4

DSO2C15 firmware

[Copy link]

1

Threads

4

Posts

4

Credits

新手上路

Rank: 1

Credits
4
Post time 2021-2-27 20:50:54 | Show all posts |Read mode
Edited by jwpark at 2021-2-27 20:52

I bought the dso2c15 a few days ago When I press the zoom button, the screen freezes.
So after receiving the dso2000 firmware from hantek website this site, and I updated the software to 20210223.00.

Now zooming is fine, but at sampling below 500MSa/s, the trigger only catches half of the screen.
As a result, 1khz is displayed as 2khz. Therefore, it is not possible to measure frequencies below 1MHz.
Frequency and trigger work normally only at 500MSa/s sampling.

So I want to downgrade to the original old version firmware. where can I download it?

Reply

Use magic Report

1

Threads

4

Posts

4

Credits

新手上路

Rank: 1

Credits
4
 Author| Post time 2021-3-1 12:11:19 | Show all posts
Edited by jwpark at 2021-3-1 16:34

While doing a search for related sites, I found some old firmware versions here: https://www.eevblog.com/forum/testgear/new-hantek-dso2x1x-models/
and downgraded to 20201221.00. All of the results returned to normal.

1

Threads

4

Posts

4

Credits

新手上路

Rank: 1

Credits
4
 Author| Post time 2021-3-3 22:08:23 | Show all posts
Everything seemed to be fine, but all of a sudden the front usb was not recognized.

I thought it was a hardware defect, so I asked hantek service for help,
and when I got a repair program from the person in charge and ran it,
everything was back to normal.

After that, I updated to the latest firmware and now everything works fine.

Thanks to hantek service representative.

0

Threads

1

Posts

1

Credits

新手上路

Rank: 1

Credits
1
Post time 2021-3-4 02:55:11 | Show all posts
jwpark replied at 2021-3-3 22:08
Everything seemed to be fine, but all of a sudden the front usb was not recognized.

I thought it wa ...

And what kind of program is this? You can post it. There were also problems with the flash drive, I had to select from several.

1

Threads

4

Posts

4

Credits

新手上路

Rank: 1

Credits
4
 Author| Post time 2021-3-4 19:24:33 | Show all posts
See the "Reply #22" post in the second article site link above. It is described in detail. I also referred to that article.
You have to log in before you can reply Login | Register

Points Rules

QQ|Dark room|Mobile|Archiver|Electronic Engineer Discuss

2021-4-22 22:13 GMT+8 , Processed in 0.185750 second(s), 21 queries .

Powered by Discuz! X3.2

© 2001-2013 Comsenz Inc.

Quick Reply To Top Return to the list