|
Hi there.
I bought a new DSO 5072P some while a ago. I was working and I did upgarde it to latest SW at that point in time.
If I recall correctly this was dso5kp_func_dso5072p20200217.up
When I wanted to use it again the DSO is not longer booting (Black screen).
I attached a USB/TTL converter in order to catch the bootlog.
I can also get into the "Download Mode Menue".
Please find the the results attached below.
As I assume that the kernel or the FS is damaged, please help be with data and procedures to get the scope back to life.
I operated just 30 hrs so far.
Thanks you.
===================== Boot. log ====================================
*** Warning - bad CRC or NAND, using default environment
##### EmbedSky BIOS for SKY2416/TQ2416 #####
This Board: SDRAM is 64MB; LCD display size is: 800 X 480
Press Space key to Download Mode.!
SD:File System init failed!
Start Linux ...
NAND read: device 0 offset 0x300000, size 0x400000
4194304 bytes read: OK
Boot with zImage
Starting kernel ...
Uncompressing Linux... done, booting the kernel.
==================== Downlod Mode Menue ==========================================
##### Boot for SKY2416/TQ2416 Main Menu #####
##### EmbedSky USB download mode #####
[1] Download u-boot or STEPLDR.nb1 or other bootloader to Nand Flash
[2] Download Eboot (eboot.nb0) to Nand Flash
[3] Download Linux Kernel (zImage.bin) to Nand Flash
[4] Download LOGO Picture (logo.bin) to Nand Flash
[5] Download UBIFS image (root.ubi) to Nand Flash
[6] Download YAFFS image (root.bin) to Nand Flash
[7] Download Program to SDRAM and Run it
[8] Boot the system
[9] Format the Nand Flash
[0] Set the boot parameters
[a] Download User Program
[n] Enter TFTP download mode menu
[r] Reboot u-boot
[t] Test Linux Image (zImage)
Enter your selection: t
Now, Please connect to USB cable and USB interface!
|
|