Please select To the mobile version | Continue to access the desktop computer version

Electronic Engineer Discuss

View: 4131|Reply: 3

Hantek DSO4254C not working anymore

[Copy link]

4

Threads

9

Posts

9

Credits

新手上路

Rank: 1

Credits
9
Post time 2018-9-21 22:09:48 | Show all posts |Read mode
Hello,

Yesterday the oscillosope arrived. I have tested it and it was working.

Today I started a measure, to check the features of the oscilloscope, but it doesn't work anymore. I used the single shot function (Single button) and after that I pressed the Run/Stop button, the Run/Stop button blinks red and green very fast and then it didn't responds to any button press. So I powered off the oscilloscope. Maybe a software bug. Now when the power-on switch is pressed, the oscilloscope hangs when the Hantek logo appears. Is there a way for a hard reset? I can't find any information for this in the user manual.




Reply

Use magic Report

100

Threads

1769

Posts

1930

Credits

版主

Rank: 7Rank: 7Rank: 7

Credits
1930
Post time 2018-9-26 12:56:05 | Show all posts



Sir, please press Power button to turn on, press Power button to turn off before the LCD screen is lit.
Now press Power button to turn on again.
If there is a figure like the picture, please press "recover the system" option to do.


This post contains more resources

You have to Login for download or view attachment(s). No Account? Register

x

55

Threads

217

Posts

389

Credits

版主

Rank: 7Rank: 7Rank: 7

Credits
389
Post time 2020-9-24 10:45:44 | Show all posts
Please refer to the video to recovery system:



This post contains more resources

You have to Login for download or view attachment(s). No Account? Register

x

0

Threads

1

Posts

1

Credits

新手上路

Rank: 1

Credits
1
Post time 2021-2-11 21:09:36 | Show all posts
Edited by Bieli at 2021-2-16 17:37

Hello,

I have same situation when shitching Single to RUN/STOP both buttons light up RUN/STOP start blink and DSO hang up. After turning it Off nad On DSO hang on initialisation screen.
I tried recovery procedure you describe but receive "Operation fail"
Pls send recovery partition file for DSO4084C.

Regards


You have to log in before you can reply Login | Register

Points Rules

QQ|Dark room|Mobile|Archiver|Electronic Engineer Discuss

2021-3-8 08:12 GMT+8 , Processed in 0.350080 second(s), 22 queries .

Powered by Discuz! X3.2

© 2001-2013 Comsenz Inc.

Quick Reply To Top Return to the list