HandHeld Oscilloscope Software

WisdomAugust

- Close Workspace

Close the current workspace.

Figure 19

- Save

Save the current window with the specified path and file name.

Figure 20

- Save As

Save the current window with a new file name.

- Export

Export files (waveform window and bus analysis window can be exported as bmp files, measurement window and acquisition window can be exported as txt file and CSV file).

Figure 21

- Open Set File

Open the settings file (extension *.set).

Figure 22

WisdomAugust

- Save Workspace

Save the current workspace.

Figure 17

- Save Workspace As

Save the current workspace with a new file name.

Figure 18

WisdomAugust

- Close

Close the current window.

- Open Workspace

Open the workspace (extension *.wrk).

Figure 16

WisdomAugust

- Open

Open the data file. The extensions are *.wfm - waveform window (YT Sheet), *.mes - measurement window (Waveform Measurement), *.dat - acquisition window (Waveform Tabular), *.mth - math window (Arithmetic), *.psm - spectrum window (Power Spectrum), *. Bus - bus analysis window (Analyse Bus).

Figure 15

WisdomAugust

- New

Create a new display windows. Window types include Analyse Bus, Arithmetic, Power Spectrum,

Waveform Measurement, Waveform Tabular, and YT Sheet. (These windows can be created repeatedly).

                     Figure 14

WisdomAugust

1.1.1 Menu Bar

                 Figure 12

File

Figure 13

WisdomAugust

1.2Software Interface

file:///C:\Users\ADMINI~1\AppData\Local\Temp\ksohtml\wps83B1.tmp.pngfile:///C:\Users\ADMINI~1\AppData\Local\Temp\ksohtml\wps83B2.tmp.pngfile:///C:\Users\ADMINI~1\AppData\Local\Temp\ksohtml\wps83B3.tmp.png

1. Menu bar

2. Toolbar

3. Link state indicator

4. Data, graph display area

5. Base Control Panel

6. Status bar

WisdomAugust

Uninstall
After you install the software, you can find “DSO1000S Ver 2.0.0.7” from the
“Programs and Features” in the Microsoft Windows Control Panel and click
“Remove” See figure 10.

                                                               

Figure 10

WisdomAugust

If you connect DSO1000S software to the oscilloscope by USB interface,
you need to install USB driver. The USB driver installed auotomatically.

. Connect the oscilloscope (now you should make sure the oscilloscope is
working) to your computer using the included USB cable.

                                         Figure 8

                                          Figure 9

WisdomAugust

? Installing DSO1000S (See Figure 6)

                                                                       Figure 6

After all the files have been installed, the installation complete and click
“Finish”. (See Figure 7)

                                                                        Figure 7