HandHeld Oscilloscope Software

WisdomAugust

Acquire

Figure 62

Number	Item	Settings	Description
1	Type	Real Time	The oscilloscope acquisition type is real-time acquisition
		Equivalent Time	The oscilloscope acquisition type is equivalent acquisition
2	Mode	Sample	The oscilloscope acquisition mode is sampling
		Peak Detect	Oscilloscope acquisition mode is peak
		Average	The oscilloscope acquisition mode is average
3	Average Count	N/A	-
4	Store Capacity	4K, 40K, 512K, 1M	Set the oscilloscope's memory depth to 4k~1M

WisdomAugust

-Type

Double click “Type”, acquisition type setup dialogue pop out. You may setup the oscilloscope between real time and equivalent time.

Figure 63

-Mode

Double click “Mode”, acquisition mode setup dialogue pop out. You may setup the oscilloscope among sample, peak detect and average.

Figure 64

-Store Capacity

Double click “Store Capacity”, store capacity setup dialogue pop out. You may setup the oscilloscope memory depth amond 4K, 40K, 512K and 1M.

Figure 65

WisdomAugust

Vertical

Figure 66

Number	Item	Settings	Description
1	Display	On	Turn on channel waveform display
		Off	Turn off channel waveform display
2	Bandwidth	Full	Turn off the bandwidth limitation
		20MHz	Turn on the bandwidth limitation to 20MHz
3	Coupling	DC	Set to DC coupling
		AC	Set to AC coupling
		GND	Set to ground coupling
4	Position	-2V～2V (2mv/div ≤Volt/Div≤ 200mv/div)	Set the vertical position of the channel waveform (in div)
		-50V～50V (200mv/div<Volt/Div ≤5v/div)
5	Scale	20mV-50V	Select the value of Volt/Div from 2mv to 50v
6	Probe	1X	Set the appropriate probe attenuation factor to make the base reading correct
		10X
		100X
		1000X
7	Invert	On	Turn on waveform invert
		Off	Turn off waveform invert