6254BC oscilloscope

elec_st@yahoo.c · Post time 2018-4-8 10:43:12

6254BC oscilloscope is 1gsa/s

when i use one channel it will be 250msa/s or 1gsa/s ?????

when i use two channel will be 500msa/s ???

amy · Post time 2018-4-8 11:26:18

Sir, the maximum sampling rate is 1GSa/s.
The time base is smaller, the sampling rate is greater.

When you open only one channel, the maximum sampling rate is 1GSa/s.
When you open two channels, the maximum sampling rate is 500MSa/s.
When you open three or four channels, the maximum sampling rate is 250MSa/s.

Alexander2912 · Post time 2018-6-28 06:49:34

I need some help with 6254bc oscilloscope which seems to have corrupted eeprom attached to Cypress microcontroller. I have replaced it but I still need firmware for this chip, is there anyone who could help?

cwcw · Post time 2019-6-20 00:48:15

6254bc can real time display on pc when time base is 100ms & depth is 64K?

amy · Post time 2019-6-26 08:52:00

Alexander2912 replied at 2018-6-28 06:49
I need some help with 6254bc oscilloscope which seems to have corrupted eeprom attached to Cypress ...

Please refer to this attachment.

6254BC oscilloscope

This post contains more resources