Please select To the mobile version | Continue to access the desktop computer version
View: 209|Reply: 3

Tekway DST 1102B - Self Calibration stops at step 26

[Copy link]

2

Threads

4

Posts

4

Credits

新手上路

Rank: 1

Credits
4
Post time 2018-1-28 06:44:22 | Show all posts |Read mode
Dear Sirs,

I just started a self calibration on my DST 1102B. This stops at step 26 - the device freezes, nothing happens. I waited for roughly 15 min - no effect. I had to switch off the device. I repeated it twice - same behaviour.

SW Version is 2.06.3 (120507.0), HW version is 10070x555583e9.

Any ideas?

Best regards,

Tim Hagemann.

Reply

Use magic Report

2

Threads

4

Posts

4

Credits

新手上路

Rank: 1

Credits
4
 Author| Post time 2018-1-28 22:10:29 | Show all posts
Did just another test - waited 2h to warm up, then tried self calibration - same behaviour.

But it is step 23 and not 26 as I stated in the original post...

14

Threads

940

Posts

1101

Credits

实习版主

Rank: 7Rank: 7Rank: 7

Credits
1101
Post time 2018-1-29 10:10:26 | Show all posts
timbocgn replied at 2018-1-28 22:10
Did just another test - waited 2h to warm up, then tried self calibration - same behaviour.

But it ...

Sir, please send a message to our email support@hantek.com

2

Threads

4

Posts

4

Credits

新手上路

Rank: 1

Credits
4
 Author| Post time 2018-1-29 17:46:51 | Show all posts
Hi Amy,

thanks for your reply - just wrote my story to the support mailbox!

Cheers,

Tim.
You have to log in before you can reply Login | Register

Points Rules

QQ|Dark room|Mobile|Archiver|Electronic Engineer Discuss

2018-2-22 09:12 GMT+8 , Processed in 0.118231 second(s), 21 queries .

Powered by Discuz! X3.2

© 2001-2013 Comsenz Inc.

Quick Reply To Top Return to the list