Please select To the mobile version | Continue to access the desktop computer version

Electronic Engineer Discuss

View: 4992|Reply: 7

DSO5102P Firmware update problem

[Copy link]

1

Threads

3

Posts

3

Credits

新手上路

Rank: 1

Credits
3
Post time 2017-5-4 20:40:01 | Show all posts |Read mode
hello,


i want to update my Hantek DSO5102P. i bought it yesterday.


i used orginal firmware from hantek download. (http://www.hantek.com/en/ProductDetail_3_26.html)


-> filename:  dso5kp_func_dso5102p20170318.up


But i always get an error 0xfe.


system infos
Modell:              DSO5102P
SW-Version:       3.40.0(161227.0)
HW-Version:       1010xffff8108


please help. kind regards

Reply

Use magic Report

124

Threads

1855

Posts

2016

Credits

版主

Rank: 7Rank: 7Rank: 7

Credits
2016
Post time 2017-5-5 09:40:47 | Show all posts
Please check the format of your USB stick. It must be FAT32 format.

1

Threads

3

Posts

3

Credits

新手上路

Rank: 1

Credits
3
 Author| Post time 2017-5-5 15:22:41 | Show all posts
Edited by chemistry78 at 2017-5-5 16:09

hello, it's FAT32 formated and recognized by the Hantek. Any ideas? i used many other usb sticks (2.0 and 3.0).


wrong file?




After click F5, it shows 0/10 and i get the error message. system info shows [upgrade count]=0
saving wave to usb stick is working, see here:






This post contains more resources

You have to Login for download or view attachment(s). No Account? Register

x

124

Threads

1855

Posts

2016

Credits

版主

Rank: 7Rank: 7Rank: 7

Credits
2016
Post time 2017-5-5 16:07:03 | Show all posts
chemistry78 replied at 2017-5-5 15:22
hello, it's FAT32 formated and recognized by the Hantek. Any ideas? i used many other usb sticks (2. ...

Please refer to the document to partition USB stick.


This post contains more resources

You have to Login for download or view attachment(s). No Account? Register

x

1

Threads

3

Posts

3

Credits

新手上路

Rank: 1

Credits
3
 Author| Post time 2017-5-5 16:30:44 | Show all posts
Hmmm, really strange. i used disk Genius.
And it worked.
Now i have sw: 3.40.0(170318.0)
:-)
Many thanks!!!!!!!

15

Threads

74

Posts

74

Credits

注册会员

Rank: 2

Credits
74
Post time 2021-5-28 01:00:52 | Show all posts
Hi HANTEK TEAM

I down loaded the Firmware 20210225 from the download page for my DSO5102P, I could not update the scope it reported the same issue as explained here in this post ,always reporting Firmware update failed error 0xfe
I then Formatted my USB stick to FAT32 and tried again that did not help then I followed the document to use disk Genius to set the sector , I then tried again but still the same Error.

Please HANTEK how can I update my Scope ,I have tried both solutions as you advised in this post. I am still not able to update .my current version is 3.40

Thanks you for your assistance

124

Threads

1855

Posts

2016

Credits

版主

Rank: 7Rank: 7Rank: 7

Credits
2016
Post time 7 day(s) ago | Show all posts
Edited by amy at 2021-6-10 09:40

What is the current firmware version number of your oscilloscope?

Please confirm the following points.
Whether the update file is in the root of USB stick.
Whether the USB stick can be identified on the oscilloscope.
Whether the waveform file can be saved to USB stick.
Whether the update file is damaged.
Whether the update file name or suffix has been changed.Whether the storage space of USB stick is less than 32G.

Here is another solution that customers share. You can also try it.
https://www.eediscuss.com/forum. ... ad&tid=14945&extra=


15

Threads

74

Posts

74

Credits

注册会员

Rank: 2

Credits
74
Post time 7 day(s) ago | Show all posts
Hi Amy,
Thank you I used Rufus as indicated here
https://www.eediscuss.com/forum. ... id=14945&extra=
It all worked out well now
Thank you so much
You have to log in before you can reply Login | Register

Points Rules

QQ|Dark room|Mobile|Archiver|Electronic Engineer Discuss

2021-6-17 01:09 GMT+8 , Processed in 0.189484 second(s), 22 queries .

Powered by Discuz! X3.2

© 2001-2013 Comsenz Inc.

Quick Reply To Top Return to the list