Hantek 6022BL front light

foxmarco · Post time 2017-2-2 18:47:15

Edited by foxmarco at 2017-2-2 19:09

Hello.
I've just received my Hantek 6022BL oscilloscope, and I had non problems toinstall software and driver. But I have a question about a thing that I have not found in the user manual.

There is a multicolor led (not mentioned in the manual, it seems)on the front panel, at the left of the two input bnc, that ever blink, in red or green.
When its color is green the software works, I can do measures (I've tried only, up til now, to calibrate probes...), but if the led blinks red the software seems freezed.

What's the function of this light? What happens because it turns to red condition and stops the oscilloscope to work?

Thank you

ciao
Marco

amy · Post time 2017-2-6 10:19:33

Sir, when you connect the scope to computer, the led is light and blink in red. When you open the software and connect successfully(There is a "running"), the scope is communication with the software, the led become green and blink.

foxmarco · Post time 2017-2-7 02:38:13

Thank you.
I supposed this condition, not mentioned in the user manual.

have a nice day!
Marco