Please select To the mobile version | Continue to access the desktop computer version

Electronic Engineer Discuss

View: 9009|Reply: 4

Hantek 3254A Problems

[Copy link]

1

Threads

2

Posts

2

Credits

新手上路

Rank: 1

Credits
2
Post time 2016-11-17 22:28:03 | Show all posts |Read mode
Edited by Teddy at 2016-11-17 22:47

I just bought my 3254A and testing it with the test 1vp-p signal at the scope.
1. I set my scope the X10 1V use channel 1 only. After start then pause with 16k memory depth. the waveform become a X1 1V (10 times shorter).
2. then increase the memory depth to 160k. and then increasing  the time/Div from 20us one step by one step. the scope's refresh rate slower and slower(i can understand this), but it stop response after 200ms.
3. after  500ms. i can only get waveform by setting the memory depth as 16k. All other memory depth didn't response.
now my 3254A only work on 16k   memory depth.    i wish to use the full memory eventhough i needed waiting for a few minute to transfer the 16M memory.




Reply

Use magic Report

167

Threads

2070

Posts

2232

Credits

版主

Rank: 7Rank: 7Rank: 7

Credits
2232
Post time 2016-11-18 10:48:32 | Show all posts



Please register a username and login to download the latest firmware: http://hantek.com/en/ProductDetail_2_134.html

1

Threads

2

Posts

2

Credits

新手上路

Rank: 1

Credits
2
 Author| Post time 2016-11-18 11:03:58 | Show all posts
Edited by Teddy at 2016-11-18 12:06

Thank you.

I understand why i got no response.   
i set    1.00ms Time/Div.   16M memory depth.   The scope will take 15sec data with 10us resolution.  which mean i set 100ms Time/Div, it will take 1500sec.. and 1 sec will be forever.

I suggest that the memory depth should go to increase the resolution frist. and then increase or fixed x2 Time/Div.  That will more easy to understand and use the scope.. Thanks a lots again.

The situation is that, if i want to take 1 sec data, i have to calculation the memory depth frist. and the decearse the Time/Div. START (i can only see the 1.00ms DATA since the Time/Div decreased) and STOP the scope. and enlarge the Time/Div back to 100ms Time/Div. ...



0

Threads

1

Posts

1

Credits

新手上路

Rank: 1

Credits
1
Post time 2017-11-13 13:30:53 | Show all posts
Hi,

can we use Hantek DSO3254A for automotive ?
Can we use Current Clamp , Hantek CC-65 or CC-650 with it ?
May we connect Transducer with this scope ?
thanks you

167

Threads

2070

Posts

2232

Credits

版主

Rank: 7Rank: 7Rank: 7

Credits
2232
Post time 2017-11-14 13:11:13 | Show all posts
compucare replied at 2017-11-13 13:30
Hi,

can we use Hantek DSO3254A for automotive ?

Sir, yes, it can be used with automotive.
You can use Current Clamp , Hantek CC-65 or CC-650 with it, but you need to convert the current value by yourself.
And pay attention to the protection voltage of the oscilloscope.
You have to log in before you can reply Login | Register

Points Rules

Dark room|Mobile|Archiver|Electronic Engineer Discuss

2024-3-29 16:51 GMT+8 , Processed in 0.162117 second(s), 21 queries .

Powered by Discuz! X3.2

© 2001-2013 Comsenz Inc.

Quick Reply To Top Return to the list