DSO5062BM (firmware 3.30.0 160111.0, HW 1010x55778344)

qwerty250478 · Post time 2016-10-23 22:03:28

Edited by qwerty250478 at 2016-10-23 22:11

DSO5062BM
Thank you for the new firmware released as v3.30.0 (160111.0)!
I looking that Filter utility is working better, but small bug still exist.
How to recreate:
1. Turn device on.
2. Go to the Utility/Filter and enable 'Low Pass' option. SEC/DIV button must be less than 80ms/DIV position at this moment.
3. Slowly turn around SEC/DIV button. At the 80ms/DIV position device will be rebooted.

This bug exist for all filters type, not only for 'Low Pass'.
Please, confirm this bug and send me new firmware if possible.

My DSO5062BM (firmware 3.30.0 160111.0, HW 1010x55778344)
Send me please the new firmware. My mail: qwerty250478@yandex.ru

amy · Post time 2019-5-25 09:46:47

Download the latest firmware in this link: http://hantek.com/en/ProductDetail_3_55.html

qwerty250478 · Post time 2019-5-26 02:16:34

OK. Downloaded dso5kb_func_dso5062bm20180226.up Thank amy

JIN64 · Post time 2019-5-22 17:31:59

Yes, and on the DSO5102B can be turned off clock and calendar. But only disconnectable!

qwerty250478 · Post time 2019-5-22 03:22:41

My DSO5062BM (firmware 3.30.0 161210.0, HW 1010x55778344)
Send me please the new firmware. My mail: qwerty250478@yandex.ru

qwerty250478 · Post time 2017-11-4 02:48:06

I ask you to remove the date and time of the oscilloscope screen. Or make it possible to disable them. They bother me. Make for me please.
I want instead to see on the screen, the current sample rate and memory depth is used.
I also think that the clock and the current date is not really needed on the oscilloscope screen. They can be used when creating the file names for screenshots. I want instead to see on the screen, the current sample rate and memory depth is used.

Oleg10011001 · Post time 2016-11-24 22:26:47

Edited by Oleg10011001 at 2016-11-24 22:30

I also think that the clock and the current date is not really needed on the oscilloscope screen. They can be used when creating the file names for screenshots. I want instead to see on the screen, the current sample rate and memory depth is used.

qwerty250478 · Post time 2016-11-24 21:14:08

Edited by qwerty250478 at 2016-11-26 21:35

I ask you to remove the date and time of the oscilloscope screen. Or make it possible to disable them. They bother me. Make for me please.
I want instead to see on the screen, the current sample rate and memory depth is used.

amy · Post time 2016-11-24 11:28:49

Sir, the time and date can not be removed.
Even if the time and date are removed, the time and date still exists when you update the firmware next time.

qwerty250478 · Post time 2016-11-22 23:56:35

Edited by qwerty250478 at 2016-11-23 00:30

I do not want, the date and time on the oscilloscope screen. Remove them from the screen. Also remove the date and time settings from the menu. Please do this for me firmware. Very you please. Installed firmware dso5kb_func_dso5062bm20161105.up
P.S Remove setting the date and time from the menu. Remove the date and time from the screen. Photo below. The clock function in the oscilloscope is not needed !!!!!

DSO5062BM (firmware 3.30.0 160111.0, HW 1010x55778344)

This post contains more resources