I installed the software and drivers for my 6022BL on a Windows 10, and Windows 7 Laptops. Both behave the same. When the button below the USB port is pushed in the device works and I can scope. If I look at the device it shows Driver 2 is loaded. If I further investigate I see the USB ID of the device as
DeviceInstanceId USB\VID_04B5&PID_602A\5&210294d2&0&1 DriverName oem7.inf ClassGuid {79046022-7904-7904-1980-198007056022} ServiceName Hantek6022BL2 LowerFilters UpperFilters Problem 0x0 Status 0x0
Now this matches the second [ODM] entry of the Hantek6022BL.inf file [ODM] %USB\VID_04B4&PID_602A.DeviceDesc%=Hantek6022BL1.Dev, USB\VID_04B4&PID_602A %USB\VID_04B5&PID_602A.DeviceDesc%=Hantek6022BL2.Dev, USB\VID_04B5&PID_602A
When I have the button in the out position the device fails and if I look at the USB ID of the failed device shows up as DeviceInstanceId USB\VID_0925&PID_3881\5&210294d2&0&1 LastDeviceInstanceId USB\VID_17EF&PID_1016\5&210294D2&0&1 ClassGuid {36FC9E60-C465-11CF-8056-444553540000} LocationPath PCIROOT(0)#PCI(1400)#USBROOT(0)#USB(1) MigrationRank 0xf000ffffffff0023 Present false Status 0xc0000719
It appears there is a missmatch for the device ID detected when the button is out and what the ODM lists as the ID on device 1. Instead of VID_04B4&PID_602A as listed in the ODM Windows enumerates this device to VID_0925&PID_3881..
Is there something wrong with my device or is this a newer component and the .inf file hasn't been updated?
|