DSO5000 Series Quick Start Guide

WisdomAugust · Post time 2016-6-3 12:56:14

WisdomAugust · Post time 2016-7-2 10:47:10

WisdomAugust · Post time 2016-7-4 14:27:36

WisdomAugust · Post time 2016-7-5 14:45:04

1.2.3 Ventilation requirements

The air intake and exhaust areas must be free from obstructions. Unrestricted air flow is required for proper cooling.

WisdomAugust · Post time 2016-7-6 08:35:13

1.2.4 To connect the probe

1. Connect the supplied oscilloscope probe to an oscilloscope channel BNC connector on the front panel.

2. Connect the retractable hook tip on the probe tip to the to be tested circuit point, and then connect the probe ground lead to the circuit ground point.

WisdomAugust · Post time 2016-7-9 13:02:53

WisdomAugust · Post time 2016-7-11 08:49:32

WisdomAugust · Post time 2016-7-13 12:47:39

DSO5000 Series Quick Start Guide

This post contains more resources

This post contains more resources

This post contains more resources

This post contains more resources

This post contains more resources

This post contains more resources

This post contains more resources

This post contains more resources