Handheld Oscilloscopes Firmware Update Instruction

WisdomAugust

Brief Steps:

①Stock the firmware file into a memory stick→②Start up device→③Plug the memory stick on the device→④Push the UTILITY button→⑤Click F5 button to turn the page to 4/4, then press F3 button to do update→⑥Using the up&dwon button to choose the correct firmware file→⑦Press ENTER button to do update→⑧Restart device automatically when updating finish.

Update procedure:

1. Stock the firmware file into a memory stick.

2. Start up device by push the yellow power button at the left bottom of the device keyboard. The device screen will appear start up interface.

               
Handheld Oscilloscope Start Up Interface


Waiting for a second, the device enters into working interface as follows:



3. Plug the memory stick into the USB port on the right side of the device.



4. Push the UTILITY button on the keyboard.




5. Click F5 button to turn the page to 4/4. And then press F3 button to do update.



6. Using the up&dwon button to choose the correct firmware file at following interface.




7. Press ENTER button to update the firmware. Device will appear following update interface.

                                               

8. Device restarts automatically when updating finished.