|
Edited by fc2022 at 2023-11-12 15:20
Hello,
I bought a Hantek 1008c recently, and when comparing the voltage measurement from the Hantek 1008c with other digital scopes and DVOM, I noticed that the measured voltage from Hantek is approximately 0.52V lower than other measuring devices. Is there a way to adjust/calibrate the voltage measurement?
This picture below shows the difference between the Hantek 1008c and our professional SnapOn Tool in the workshop. I also confirmed with a Digital Multimeter that the reading on my Hantek unit is 0.52volts lower than the DMM.
|
This post contains more resources
You have to Login for download or view attachment(s). No Account? Register
x
|