Please select To the mobile version | Continue to access the desktop computer version

Electronic Engineer Discuss

View: 5120|Reply: 8

DSO2D10

[Copy link]

183

Threads

737

Posts

742

Credits

超级版主

Rank: 8Rank: 8

Credits
742
Post time 2023-1-5 11:50:30 | Show all posts |Read mode

Customer consultation

My Reply:
The power button works. The light is on. There is a waveform after
the channel is connected to the 1KHz terminal.
The twist control knobs are not working (all of them). Everything
else seems to be working.
Turning the system off an back on does not work. This is a brand
new unit and it was working perfectly for about 20 hours. Now the
control dials don't do anything. Could this be fixed with a
factory reset? Is there a way to do a factory reset?


Reply

Use magic Report

2

Threads

3

Posts

3

Credits

新手上路

Rank: 1

Credits
3
Post time 2023-1-18 08:42:30 | Show all posts
Try pressed "DEFAULT SETUP" + "POWER ON"

0

Threads

3

Posts

3

Credits

新手上路

Rank: 1

Credits
3
Post time 2023-3-4 18:10:06 | Show all posts
Where I can download driver for windows 11? Device don't recognize

183

Threads

737

Posts

742

Credits

超级版主

Rank: 8Rank: 8

Credits
742
 Author| Post time 2023-3-6 15:15:07 | Show all posts
bsh1tt replied at 2023-3-4 18:10
Where I can download driver for windows 11? Device don't recognize

Dear Sir,
You can download IO from KEYSIGHT official website, see that there is no new IO program for win11.


This post contains more resources

You have to Login for download or view attachment(s). No Account? Register

x

0

Threads

3

Posts

3

Credits

新手上路

Rank: 1

Credits
3
Post time 2023-3-10 22:56:40 | Show all posts
Jing replied at 2023-3-6 15:15
Dear Sir,
You can download IO from KEYSIGHT official website, see that there is no new IO program  ...

thanks of course. But this is a common driver for devices with visa. Windows 11 reports a driver error. I need a normal working driver so that there are no errors

183

Threads

737

Posts

742

Credits

超级版主

Rank: 8Rank: 8

Credits
742
 Author| Post time 2023-3-11 14:15:49 | Show all posts
bsh1tt replied at 2023-3-10 22:56
thanks of course. But this is a common driver for devices with visa. Windows 11 reports a driver e ...

Dear Sir,
We recommend Windows 10, where Ketsight IO can be used normally and recognize the machine.

1

Threads

20

Posts

20

Credits

新手上路

Rank: 1

Credits
20
Post time 2023-9-10 18:29:46 | Show all posts
Hello, I have the same problem as the OP.

The scope worked well several months ago, but when I connected it yesterday, everything seems to go OK except for the knobs (all of them).

UTILITY/FrontPanelSelftest confirms the problem: all pushbuttons work but none of the rotary knobs do.

I've tried software and firmware update to the latest version SW 1.0.2.0.0 (221028.00) FW 3205 with platform tools (it's impossible to do it via USB drive, as the V0 knob is needed to select the file...), and also downgrading it again to 1.0.1.1.0(20210726.0)-3202, but the problem persists

Any idea? Hardware failure at front panel PCB or other possibilities?

1

Threads

20

Posts

20

Credits

新手上路

Rank: 1

Credits
20
Post time 2023-9-19 16:44:24 | Show all posts
Edited by morgan_flint at 2023-9-19 16:47
morgan_flint replied at 2023-9-10 18:29
Hello, I have the same problem as the OP.

The scope worked well several months ago, but when I conn ...

PROBLEM SOLVED

The failure was caused by a faulty rotary encoder that, due to bad design, had one of its terminals short-circuited to the case and, hence, to ground, blocking not only its signal but that of the rest of the encoders, as they all share the same row in the front panel scanning matrix.

Technical details here, and the initial debugging of the problem in the posts from here at the same thread.

Basically, you have to detect which of the encoders have the problem checking continuity form both sides to ground and then replace it or repair it with some isolation tape.

BTW, this problem not only affects the DSO2000 series but also other models that share the same type of encoders and user interface scanning solution. In fact, the video that describes the problem and its solution is for a DSO5202P.

0

Threads

1

Posts

1

Credits

新手上路

Rank: 1

Credits
1
Post time 2023-12-15 21:16:32 From the mobile phone | Show all posts
Hi, in dso2d10 model which command causes data sending to USB port and which scpi command can read the binary data from USB port. Almost whole command for setting and getting parameters works (like *idn?), but I cannot find command like ":acquire:memory?"  
You have to log in before you can reply Login | Register

Points Rules

Dark room|Mobile|Archiver|Electronic Engineer Discuss

2024-5-20 02:44 GMT+8 , Processed in 0.170531 second(s), 22 queries .

Powered by Discuz! X3.2

© 2001-2013 Comsenz Inc.

Quick Reply To Top Return to the list