The 6022BL has an LED, this blinks red if the 6022BE app is NOT running and blinks green when the 6022BE app IS running. What is the meaning of the LED? Should it blink or should be be on, and not blinking?
There is a small pushbutton switch near the USB connector labelled H and P. What is the purpose of this switch?
In the logic analyzer mode, how can a trigger be set, for example start the trace when channel 1 = 0, channel 2 = 1, channel 3 =0?
Dear Sir，
When the machine is connected to the computer, the light is red; When the machine successfully connects the software and runs successfully, the light is green.
When using oscilloscope function, press H/P key to run 6022BE software; When using the logic analyzer function, run the 6022BL software as H/P.
Please describe the problem with your logic analyzer in detail.
Post time 2022-12-11 06:31:35
Favorites
Shares
Collection
Post time 2022-12-13 14:48:17