Digital Multimeter HDM3055 Series Manual

WisdomAugust

Store Settings

Store Settings allows you to browse to a directory and specify a file name, and to choose whether

you want to store a state file or a preference file.

WisdomAugust

Press State Preference to select whether you want to store a state or preferences file, and press

Store State (shown above) or Store Pref (the softkey's label if you are storing preferences) to

store the specified file.

Action allows you to either store a file or to create a new folder.

WisdomAugust

Recall Settings

Recall Settings allows you to browse to the file to be recalled. Use the arrow keys to navigate to

the desired state file (*.sta) or preferences file (*.prf).

WisdomAugust

Power On

Power On selects the state that is loaded at power-up. This can be either the state when the instrument

was powered down with the power switch (Last), a user-selected state file (User Defined), or the factory

default state (Factory Defaults).

Set to Defaults

There are two ways to set to defaults.

1 Press Set to Defaults softkey loads the instrument's factory default state.

WisdomAugust

file:///C:/Users/ADMINI~1/AppData/Local/Temp/ksohtml15556/wps1.png2 Press the Preset/Default key P on the left upper side of the front to load the instrument’s default state.

WisdomAugust

Utility Menu - Manage Files

The Manage Files softkey allows you to create, copy, delete, and rename files and folders in the

instrument's internal flash memory or on a USB drive attached to the front panel. It also allows you

to capture the current screen to either a bitmap (*.bmp) or portable network graphics (*.png) file.

This is the default option, as shown below.

WisdomAugust

Action

Action specifies the action to perform. Pressing Capture Display saves a screen capture of the

display at the moment that you pressed [Shift] to go to the [Utility] menu.

Delete - To delete a file or folder, press Delete and Browse to the folder or file to delete. Press

Select > Perform Delete > Done.

Folder - To create a folder, Browse to the internal or external location for the folder, press File

Name, enter a folder name and press Done. Press Create Folder > Done.

Copy - To copy a file or folder, press Copy. Browse to the folder or file to be copied and press

Select. Press Copy Path and select an internal or external path for copying. Press Perform

Copy > Done.

Rename - To rename a file or folder, press Rename. Browse to the folder or file to be renamed

and press Select. Press New Name, enter a new name and press Done. Press Perform

Rename > Done.

WisdomAugust

Browse

Browse selects the file or folder upon which the action will be performed.

Use the front panel arrows and [OK] key to navigate through the list, and press Select or Cancel

to exit the browse window. The left and right arrows contract or expand a folder to hide or show its

files.

WisdomAugust

File Name

File Name allows you to use the front panel arrows, the [OK] key, and the softkeys to enter a file

name. Use the front panel arrows to point to a letter, and Previous Char and Next Char to move

the cursor in the area where the name is entered.

Press [Done] or [Cancel] to finish.

WisdomAugust

Utility Menu - I/O Configuration

I/O Config configures the I/O parameters for remote operations over the LAN (optional on HDM3065B),

USB, or GPIB (optional on HDM3065H) interface.

LAN Settings

LAN Settings opens the menu shown below.