Single Output DC Power Supply HDP135V6 Series Guide

WisdomAugust · Post time 2022-10-12 08:21:06

Options and fuse information

Warning Ensure you order the proper DC power supply model for the mains power that will be used for the DC

power supply.

Ensure the correct AC input voltage and fuse settings

WisdomAugust · Post time 2022-10-11 08:40:00

Setup the instrument

Place the power supply's feet on a flat horizontal surface. Connect output leads to the front panel,

being careful not to short the leads together. Attach the power cord to the rear panel, then plug it into the main power.

Connect RS232 cable as desired, and you may also secure the power supply with a security lock cable.

Before disconnecting cables and cords from the power supply, turn the power supply off using the rear-panel power

switch and disconnect from the supply source by unplugging the detachable power cord.

WisdomAugust · Post time 2022-10-10 09:10:34

WisdomAugust · Post time 2022-10-9 10:27:12

WisdomAugust · Post time 2022-10-8 16:09:52

WisdomAugust · Post time 2022-9-15 10:01:50

WisdomAugust · Post time 2022-9-14 08:45:25

WisdomAugust · Post time 2022-9-8 09:46:48

Introduction

Features

l Single channel

l Quiet operation

l Safety interlock

l Power up to 210W

l 10mV/1mA resolution

l Up to 6A or 35V output

l Memory for up to 10 setups

l Low output ripple and noise

l Individual knobs for voltage and current

l With 5-12V output quick charging USB interface

l Computer control via RS232, programmable (HDP135V6S only)

l LED display to indicate 4 digits voltage and current simultaneously

l Over voltage, over current, over temperature, and short circuit protection

Package contents list

Inspect the following standard shipped items of the HDP135V6 series DC power supply.

l 1pc Power Supply

l 1pc Power Cord

l 1pair Power Test Leads

l 1pc Certificate of Conformity

WisdomAugust · Post time 2022-9-6 09:13:44

WisdomAugust · Post time 2022-9-5 09:11:21