Save pictures without showing the toolbar

titomelli · Post time 2022-8-20 13:25:46

I have a DSO4204C and I need to save pictures of the measurements I take in the USB stick.

How could it be done without saving also the toolbar in the picture?

It's not professional to show this toolbar with the results I take at the work.

How can it be solved?

Best regards

Jing · Post time 2022-8-22 21:50:09

Dear Sir，
Please provide relevant videos where the machine save function is not working, you can send an email to support@hantek.com.

titomelli · Post time 2022-9-2 01:47:19

Edited by titomelli at 2022-9-2 01:50

Hello,

Please find attached the picture.

Is it possible to save pictures without saving also the toolbar on the right side?

Jing · Post time 2022-9-6 10:50:20

titomelli replied at 2022-9-2 01:47
Hello,

Please find attached the picture.

Dear Sir，
After the machine is plugged into the USB device, after long pressing the Save/Recall button, the machine will save the picture to the USB.

titomelli · Post time 2022-9-9 20:26:10

Hello, this is exactly what I needed. Thanks a lot for the support. Best regards

Save pictures without showing the toolbar

This post contains more resources