DSO5102B firmware updates fail with 0xfe

crazyfreebsd · Post time 2022-6-8 01:56:47

I’ve tried upgrading the firmware on my DSO5102B using the files below, and both resulted in 0xfe errors (no update file found).

dso5kb_func_dso5102b20140610.up

dso5kb_func_dso5202b20190830.up

These firmware files were obtained from the Hantek website.

I tried multiple FAT32-formatted 1GB & 8GB USB flash drives. The flash drives are otherwise operational with the scope. I can save waveforms and screenshots to USB ok. I've reformatted so the only file present is the firmware up file. No luck.

Any help would be appreciated.

Scope S/N: T 1G/012 005459

SW version: 2.06.3 (120224.0)

HW version: 0x555583e8

Thanks

crazyfreebsd · Post time 2022-6-29 10:19:31

Up Up Up Up Up

Jing · Post time 2022-6-30 16:53:21

Dear Sir，
The version on the official website is dso5kb_func_dso5102b20190830.up. Did you download it right?
http://hantek.com/products/detail/3

crazyfreebsd · Post time 2022-7-1 05:50:57

Yes, I have download the last firmware (dso5kb_func_dso5102b20190830.up) in different computers, but always resulted in 0xfe error.
Any help would be apreciated.

Thanks.

crazyfreebsd · Post time 2022-7-7 05:15:17

Up up
Up UP Up

crazyfreebsd · Post time 2022-9-6 19:19:23

Reviewing the forum I have found a similar topic:
https://www.eediscuss.com/forum.php?mod=viewthread&tid=14805

In this post a member sends a alternative firmware compatible that solves the problem.
But this firmware is for DSO5202B. Amy or anyone has alternative firmware for DSO5102B?

Thanks

crazyfreebsd · Post time 2022-10-31 17:24:54

Up Up Up
Up UP

amy · Post time 2022-11-2 09:00:19

crazyfreebsd replied at 2022-9-6 19:19
Reviewing the forum I have found a similar topic:
https://www.eediscuss.com/forum.php?mod=viewthread ...

Your oscilloscope version is too old. Updating the firmware may cause it to fail to start.

crazyfreebsd · Post time 2023-3-8 17:48:29

Thanks for the information amy