|
Edited by UR5GQW at 2021-12-30 05:22
Good day! I got a problem after updating Hantek DSO5202B S/N: T1G / 012 015922 oscilloscope, the update was downloaded from the official website. The oscilloscope has been updated and after reboot does not turn on, hangs on the splash screen at startup. It does not respond to pressing the buttons, the recovery mode does not start, it hangs on the splash screen. The version of the file to update was dso5kb_func_dso5202b20190830.up. I started looking for information about repairing my device. A log was read that the device gives to the UART port when turned on, the file is attached. I have an old-style device where the memory also consists of 4 Bootloader, Logo, Kernel and Rootfs partitions, when trying to upload a backup to a memory card, the first 3 were considered good, but the last one with errors, first error that the partition was not found, then the low usb speed, and each time the file is recorded with a different volume (not correct). Obviously, the problem is in the Rootfs partition. I am looking for a firmware for my device. How can I repair my oscilloscope? Help me plese with the restoration of the device.
|
This post contains more resources
You have to Login for download or view attachment(s). No Account? Register
x
|