Please select To the mobile version | Continue to access the desktop computer version

Electronic Engineer Discuss

View: 201|Reply: 6

DSO2000 Series SCPI Programmers Manual

[Copy link]

52

Threads

822

Posts

902

Credits

高级会员

Rank: 4

Credits
902
Post time 2021-6-1 14:41:35 | Show all posts |Read mode
Chapter 1 Programming Overview
Install IO software

This oscilloscope can communicate with PC via USB. The following will introduce how to use IO LibSuite
software to remotely control the oscilloscope through USB interface.
Operation steps:
1. Install Keysight IO LibSuite software. Log in to the keysight official website to download IO LibSuite
software, and then follow the instructions to install.







Reply

Use magic Report

52

Threads

822

Posts

902

Credits

高级会员

Rank: 4

Credits
902
 Author| Post time 2021-6-1 14:44:58 | Show all posts




This post contains more resources

You have to Login for download or view attachment(s). No Account? Register

x

52

Threads

822

Posts

902

Credits

高级会员

Rank: 4

Credits
902
 Author| Post time 2021-6-2 08:15:02 | Show all posts
Edited by WisdomAugust at 2021-6-2 08:16

2. Connect and configure the interface parameters of the instrument.
The DSO2000 series can communicate with a PC via USB. This manual uses USB as an example.

[size=10.5000pt](1) Connect the device
Connect the USB Device interface on the rear panel of the oscilloscope to the USB Host interface
of the computer using a USB data cable.


(2) Install the USB driver
The PC will automatically install the oscilloscope driver [At the same time, the USB Device icon will
be displayed on the oscilloscope]. Open the device manager to view the device as follows:




This post contains more resources

You have to Login for download or view attachment(s). No Account? Register

x

52

Threads

822

Posts

902

Credits

高级会员

Rank: 4

Credits
902
 Author| Post time 2021-6-3 08:16:09 | Show all posts
Edited by WisdomAugust at 2021-6-3 08:17

(3) Search for device resources
Open IO, the software will automatically search for the instrument resources currently connected
to the PC via the USB interface. You can also click “Rescan” to search.





This post contains more resources

You have to Login for download or view attachment(s). No Account? Register

x

52

Threads

822

Posts

902

Credits

高级会员

Rank: 4

Credits
902
 Author| Post time 2021-6-4 13:34:56 | Show all posts
(4) View device resources
The searched resources will appear in the “USB” directory, and display the model and USB interface
information of the instrument, as shown in the figure above. For example: DSO2C10 (USB0::0x049F
::0x505E::111::0::INSTR).
(5) Remote control
Click Send Commands To This Instrument to open "Interactive IO", open the remote command control
panel, you can send commands and read data through this panel.



This post contains more resources

You have to Login for download or view attachment(s). No Account? Register

x

52

Threads

822

Posts

902

Credits

高级会员

Rank: 4

Credits
902
 Author| Post time 2021-6-5 09:37:41 | Show all posts
Remote control method

[size=10.5000pt]1. User-defined programming

The user can program and control the oscilloscope through the standard SCPI (Standard Commands
for Programmable Instruments) commands. For a detailed description of commands and programming,
please refer to "Chapter 3 Programming Examples".

2. Send SCPI commands using PC software

Users can use PC software to send commands to remotely control the oscilloscope. It is recommended
to use the IO software provided by Keysight.


52

Threads

822

Posts

902

Credits

高级会员

Rank: 4

Credits
902
 Author| Post time 2021-6-7 11:14:54 | Show all posts
Introduction to SCPI commands
SCPI (abbreviation of Standard Commands for Programmable Instruments), that is, the standard
command set of programmable instruments (programmable instruments). SCPI is a standardized
instrument based on the existing standards IEEE 488.1 and IEEE 488.2, and following the floating
-point arithmetic rules of the IEEE 754 standard, ISO 646 information exchange 7-bit coded symbols
(equivalent to ASCII programming) and other standards Programming language. SCPI commands
are tree-like hierarchies, including multiple subsystems, and each subsystem consists of a root
keyword and one or more hierarchical keywords.


You have to log in before you can reply Login | Register

Points Rules

QQ|Dark room|Mobile|Archiver|Electronic Engineer Discuss

2021-6-16 23:59 GMT+8 , Processed in 0.200743 second(s), 22 queries .

Powered by Discuz! X3.2

© 2001-2013 Comsenz Inc.

Quick Reply To Top Return to the list