DSC4102C firmware update problem (error 0xfe)

OASJ2YSeeEhBQo1 · Post time 2020-12-27 07:30:37

Format your USB flash driver using the SD Formatter tool, copy the .up update file to it and try again

https://www.sdcard.org/downloads/formatter/

OASJ2YSeeEhBQo1 · Post time 2020-12-29 13:27:55

Download the correct file from the product's page: http://www.hantek.com/uploadpic/ ... 81235_227151402.rar

the downloaded file is compressed in .rar format. you need to decompress it to extract the update file inside.

Copy the update file (the one with extension .up) to the the flash drive, you have to copy only the .up file, do NOT put it inside any folder otherwise the oscilloscope will not find it.

OASJ2YSeeEhBQo1 · Post time 2021-1-2 14:03:04

pgiorgio61 replied at 2020-12-31 01:46
Thanks for your suggestion but, unfortunately, doesn't work.
This is what I have done:

1 - formatted an USB 1G in FAT32

Did you format the USB flash stick using the SD Formatter tool that I referred in my first reply?

https://www.sdcard.org/downloads/formatter/