Edited by amy at 2020-11-25 10:28
Customer Consultation
Dear Ladies and Gentlemen, I have used a HANTEK DSO3064A for years and purchased a new test-tip recently to test on 220 Grid Input. With that I had a male function and Capacitor on the BNC Input had a short to ground and also USB Output the inductor to ground was open. Is it possible to get a schematic of the DSO3064 that I can do the repair. Or minimum some test points and schematic parts of Input and USB interface. Thank you very much for your support. Regards
Reply
Please check whether the motherboard is burnt out. And upload a picture to study.
|