Electronic Engineer Discuss

View: 4831|Reply: 2
Print Prev. thread Next thread

HT25 not working correctly

[Copy link]

1

Threads

3

Posts

3

Credits

新手上路

Rank: 1

Credits
3
Jump to specified page
1#
Post time 2020-10-22 10:37:13 | Show the author posts only Reply Awards |Descending |Read mode
I just received a 1008C oscilloscope purchased through Amazon.com. The HT25 pickup does not appear to work. When it is connected to a spark plug wire on a running engine I get intermittent and random negative going spikes, not well defined, positive going secondary discharge waveforms as expected. The waveform is the same negative going random spikes whether the ground is open, connected to the battery negative terminal or the engine block.. Also, reversing the clip on the spark plug wire makes no difference. How can I resolve this issue?


Reply

Use magic Report

1

Threads

3

Posts

3

Credits

新手上路

Rank: 1

Credits
3
2#
 Author| Post time 2020-10-25 00:01:26 | Show the author posts only
No replies from Hantek? Really? Are you serious? Some product support would be a good thing here, Hantek.

2

Threads

5

Posts

5

Credits

新手上路

Rank: 1

Credits
5
3#
Post time 2020-12-5 21:26:38 | Show the author posts only
hi,

you cannot use the HT-25 on a spark plug wire, since it picks up secondary voltage coming from the coil itself

use a Hantek HT308 COP HT extension lead

cheers

You have to log in before you can reply Login | Register

Points Rules

Dark room|Mobile|Archiver|Electronic Engineer Discuss

2024-4-25 14:38 GMT+8 , Processed in 0.151320 second(s), 20 queries .

Powered by Discuz! X3.2

© 2001-2013 Comsenz Inc.

Quick Reply To Top Return to the list