Electronic Engineer Discuss

View: 6636|Reply: 9
Print Prev. thread Next thread

2d42 does not turn on with batteries, for USB yes

[Copy link]

1

Threads

3

Posts

3

Credits

新手上路

Rank: 1

Credits
3
Jump to specified page
1#
Post time 2020-8-14 09:56:21 | Show the author posts only Reply Awards |Descending |Read mode
2d42 arrived with the batteries turned upside down, with the polarity reversed. It does not turn on with batteries, it only turns on with USB cable. It was tested with other batteries and it does not turn on. How can I repair it or how can I get the electrical diagram of the equipment to analyze the board

Reply

Use magic Report

167

Threads

2070

Posts

2232

Credits

版主

Rank: 7Rank: 7Rank: 7

Credits
2232
2#
Post time 2020-8-15 09:38:54 | Show the author posts only
Please test the voltage of the battery to confirm whether the battery is faulty.

1

Threads

3

Posts

3

Credits

新手上路

Rank: 1

Credits
3
3#
 Author| Post time 2020-8-16 00:31:59 | Show the author posts only
Batteries are fine, 3.8v

167

Threads

2070

Posts

2232

Credits

版主

Rank: 7Rank: 7Rank: 7

Credits
2232
4#
Post time 2020-8-17 15:48:18 | Show the author posts only
Please use the battery forpower, and test whether these voltages are correct.
VBAT: When you power the scope by battery, it should be equal to the battery voltage.
3.3V: When you power the scope by battery or adapter, regardless of whether it is turned on or not, the voltage is always 3.3V.


This post contains more resources

You have to Login for download or view attachment(s). No Account? Register

x

1

Threads

3

Posts

3

Credits

新手上路

Rank: 1

Credits
3
5#
 Author| Post time 2020-8-19 15:24:20 From the mobile phone | Show the author posts only
VUSB: 4.8v  - VBAT: 3.7V - 3.3V : 3.1V

167

Threads

2070

Posts

2232

Credits

版主

Rank: 7Rank: 7Rank: 7

Credits
2232
6#
Post time 2020-8-21 14:53:20 | Show the author posts only
Edited by amy at 2020-8-21 14:55

Please check whether these two chips are burnt out. If so, please replace them.
U14/U15: HM5431A



This post contains more resources

You have to Login for download or view attachment(s). No Account? Register

x

0

Threads

4

Posts

4

Credits

新手上路

Rank: 1

Credits
4
7#
Post time 2020-9-7 10:32:57 From the mobile phone | Show the author posts only
Hi , I have the same problem . Remarks:I have a problem with battery charge, the oscilloscope doesn’t charge the battery but when I connected to the cable charger and the computer the Osciloscope works well but doesn’t charge the battery

0

Threads

4

Posts

4

Credits

新手上路

Rank: 1

Credits
4
8#
Post time 2020-9-7 10:34:50 From the mobile phone | Show the author posts only
I check the voltage out : same as Mr cm electronica

0

Threads

1

Posts

1

Credits

新手上路

Rank: 1

Credits
1
9#
Post time 2024-1-8 20:01:48 | Show the author posts only
Edited by cyoung123 at 2024-1-8 22:11

It sounds like you're experiencing a frustrating issue with your 2d42 device, especially concerning the reversed battery polarity. Hve u figured out what a problem was? I had such a concern with my Milwaukee battery.

0

Threads

1

Posts

1

Credits

新手上路

Rank: 1

Credits
1
10#
Post time 2024-1-8 22:33:40 | Show the author posts only
Milwaukee offers a range of batteries with varying voltages to power their tools. As of my last update, some common voltages for Milwaukee batteries include 12V, 18V, and 20V (or 18V/20V Max for some models). However, it's essential to check specific product details or the manufacturer's website for the most current information, as tool and battery specifications can evolve over time. Milwaukee batteries https://www.ukplanettools.co.uk/tool-brands/power-tool-batteries/l/manufacturer:milwaukee/ are known for their longevity, providing consistent power output even during demanding tasks. The RedLithium technology they incorporate ensures extended runtimes and faster charge cycles, which is incredibly beneficial for uninterrupted work sessions.
You have to log in before you can reply Login | Register

Points Rules

Dark room|Mobile|Archiver|Electronic Engineer Discuss

2024-4-26 00:58 GMT+8 , Processed in 0.179815 second(s), 21 queries .

Powered by Discuz! X3.2

© 2001-2013 Comsenz Inc.

Quick Reply To Top Return to the list