MPO6002EDU Series Oscilloscope Guide

WisdomAugust · Post time 2020-12-2 08:48:13

Edited by WisdomAugust at 2020-12-5 09:37

Utility Key -> Acquire -> Fast Acquire Softkey help information

Turn on or off Fast Acquire function.

The purpose of Fast Acquire is to enable high-speed waveform capture, which is helpful in finding elusive signal anomalies.

Utility Key -> Acquire -> Segmented -> Segmented On/Off Softkey help information

Press this softkey to open the Sequence Mode menu.

Using Sequence Mode, thousands of trigger events can be stored as segments into the scope's acquisition memory.

Utility Key -> Acquire -> Segmented -> Segments Set Softkey help information

Press this softkey and turn the V0 knob to adjust the number of segments.

Utility Key -> Acquire -> Segmented -> History Wave Softkey help information

Access History Mode.

The history mode allows you to look back to previous acquisitions stored in the scope's buffer.

WisdomAugust · Post time 2020-12-3 08:25:26

Edited by WisdomAugust at 2020-12-5 09:37

Utility Key -> Acquire -> Segmented -> History Wave -> Frame No. Softkey help information

Press this softkey to adjust the frame number of waveforms.

Utility Key -> Acquire -> Segmented -> History Wave -> Forward Icon Softkey help information

Press this softkey to step to a newer acquisition.

Utility Key -> Acquire -> Segmented -> History Wave -> Play Icon Softkey help information

To scroll the history of acquisition forward.

Utility Key -> Acquire -> Segmented -> History Wave -> Stop Icon Softkey help information

Pause to scroll the history of acquisition.

Utility Key -> Acquire -> Segmented -> History Wave -> Back Icon Softkey help information

Press this softkey to jump to an older acquisition.

Utility Key -> Acquire -> Segmented -> History Wave -> List On/Off Softkey help information

Press this softkey to display a list of previously captured waveforms at the top left of the screen.

WisdomAugust · Post time 2020-12-4 10:27:56

Edited by WisdomAugust at 2020-12-5 08:28

Utility Key -> Acquire -> Segmented -> History Wave -> Interval Softkey help information

Press this softkey and use the V0 knob to set the time intervals among each acquisition.

Utility Key -> Acquire -> Segmented -> History Wave -> Return Softkey help information

Press this softkey to return to the previous menu.

Utility Key -> Acquire -> Segmented -> Return Softkey help information

Press this softkey to return to the previous menu.

Utility Key -> Acquire -> Segmented Softkey help information

Turn on or off the Sequence Mode.

Utility Key -> Acquire -> TimeRef Center Softkey help information

Set the waveform horizontally expand from the trigger point or from the screen center.

Utility Key -> Acquire -> Return Softkey help information

Press this softkey to return to the previous menu.

WisdomAugust · Post time 2020-12-5 08:25:46

Edited by WisdomAugust at 2020-12-5 08:26

Utility Key -> LA Softkey help information

Open the Logic Analyzer Menu when a logic probe is connected.

It's unusable if no logic probe has been found.

Utility Key -> LA -> Enable Softkey help information

Switch a group of digital channels on or off.

When 4 analog channels (oscilloscope channels) are all turned on, the digital channels (logic analyzer channels) are not usable.

When 3 analog channels turn on, 1 group of digital channels (including 4 digital channels) is usable.

When 2 analog channels turn on, 2 groups of digital channels are usable.

When 1 analog channel turns on, 3 groups of digital channels are usable.

When all the analog channel turns off, 4 groups of digital channels are usable.

WisdomAugust · Post time 2020-12-7 08:27:01

Utility Key -> LA -> Source Softkey help information

Press this softkey and turn V0 knob to select a group of digital channels to display.

Note that each group of digital channel includes 4 digital channels.

Utility Key -> LA -> Type Softkey help information

Press this softkey and use V0 knob to change the logic threshold for digital channels.

Utility Key -> LA -> Threshold Softkey help information

If the Type softkey is set to User, press the Threshold softkey and turn the V0 knob to set the logic threshold.

WisdomAugust · Post time 2020-12-8 08:10:35

Edited by WisdomAugust at 2020-12-8 08:11

Utility Key -> System Info Softkey help information

Press the System Info key to review the information about the scope like model number, serial number,

software version, firmware version, and the FPGA version.

Utility Key -> Update Softkey help information

Press the Update softkey to enter the Firmware Update Menu.

Utility Key -> Update -> Update Firmware Softkey help information

Press this softkey to display a screen-based file list if a USB storage device with an update program under

the root directory detected.

Utility Key -> Update -> Press To Update Softkey help information

When the firmware file selected by using the V0 knob, press this softkey to upgrade the scope firmware.

Utility Key -> Update -> Return Softkey help information

Press this softkey to return to the previous menu.

WisdomAugust · Post time 2020-12-9 08:25:34

Utility Key -> Pass/Fail Softkey help information

Open the Pass/Fail Menu.

Utility Key -> Pass/Fail -> Enable Test Softkey help information

Turn on or off the Pass/Fail function.

Utility Key -> Pass/Fail -> Source Softkey help information

Select a signal input channel from which to create the mask.

Utility Key -> Pass/Fail -> Mask Softkey help information

This key opens the Mask Setup Menu.

WisdomAugust · Post time 2020-12-10 08:20:53

Utility Key -> Pass/Fail -> Mask -> Vertical Softkey help information

Press this key and rotate V0 knob to adjust the vertical clearance range of mask.

Utility Key -> Pass/Fail -> Mask -> Horizontal Softkey help information

Press this key and rotate V0 knob to adjust the horizontal tolerance range of mask.

Utility Key -> Pass/Fail -> Mask -> Create Softkey help information

Press this softkey to create a mask.

Utility Key -> Pass/Fail -> Mask -> Save Softkey help information

Press this softkey to display the Save Mask Menu.

WisdomAugust · Post time 2020-12-11 08:11:27

Edited by WisdomAugust at 2020-12-11 08:12

Utility Key -> Pass/Fail -> Mask -> Save -> Save To Softkey help information

Press this softkey to select a storage location for the mask.

Utility Key -> Pass/Fail -> Mask -> Save -> Save Softkey help information

Press this softkey you can save masks to the scope's internal memory.

Utility Key -> Pass/Fail -> Mask -> Save -> Recall Softkey help information

Press this softkey to recall a mask from internal memory.

Utility Key -> Pass/Fail -> Mask -> Save -> Return Softkey help information

Press this softkey to return to the previous menu.

Utility Key -> Pass/Fail -> Mask -> Return Softkey help information

Press this softkey to return to the previous menu.

WisdomAugust · Post time 2020-12-14 10:34:32

Utility Key -> Pass/Fail -> Message On/Off Softkey help information

To open or close the time information for the waveform pass/fail.

Utility Key -> Pass/Fail -> Stop On Output Softkey help information

Stop sweep when the first input waveform does not conform to the mask.

Utility Key -> Pass/Fail -> Output On/Off Softkey help information

When turning off, the scope enters Stop state if output exists.

When turning on, the scope continues to run if the output exists.

Note that this function is available when the scope with an AUX terminal.

Utility Key -> Pass/Fail -> Mode Softkey help information

Select the expected condition to output.

Pass - Output a negative pulse train when the test is passed.

Fail - Output a negative pulse train when the test is failed.

Pass Ring - Ringing, and output a negative pulse train when the test is passed.

Fail Ring - Ringing, and output a negative pulse train when the test is failed.

Note that this function is available when the scope with an AUX terminal.