Trig Menu Key help information Use the Trigger Menu to set up the trigger type (or serial decode type) and trigger settings for the selected, to choose trigger mode, and to set the holdoff.
Trig Menu Key -> Type Softkey help information Select the trigger type: Edge, Pulse, Video, Slope, Timeout, Window, Pattern, Interval, Runt, Delay, Setup/Hold. And set the decode mode: UART, LIN, CAN, SPI, IIC.
Trig Menu Key -> Type -> Edge -> Source Softkey help information Press this softkey to select edge trigger source from analog or digital channels.
Trig Menu Key -> Type -> Edge -> Slope Softkey help information Set the trigger slope for the selected trigger source as rising, falling, or either.
Trig Menu Key -> Type -> Pulse -> Source Softkey help information Select pulse width trigger source from analog or digital channels by pressing this softkey.
|