Hantek6254BC IIC (I2C) decoding

wangshuang · Post time 2020-6-9 15:54:17

Please contact me with email, file is too large to upload here.
My address: wangshuang@hantek.com

wangshuang · Post time 2020-6-30 09:49:47

KeenAmateur replied at 2020-6-27 18:29
What file at what version was provided to solve this issue?
Is it FPGA image from D001 > F004 or som ...

Please refer to this post to update the FPGA.
https://www.eediscuss.com/forum. ... id=15193&extra=

wangshuang · Post time 2020-7-20 14:40:50

QMESAR replied at 2020-7-17 21:46
Hi Hantek Team.
I have an 6254BD is it possible to have IIC decoding ? if I understand this post cor ...

Same for 6254BD.

wangshuang · Post time 2020-7-22 08:39:11

QMESAR replied at 2020-7-21 15:34
I would expect the I2C to be under the Trigger setup but with me there is nothing,
I have successful ...

Please download the latest software to try again.
http://hantek.com.cn/products/detail/10164

wangshuang · Post time 2020-7-22 18:19:49

KeenAmateur replied at 2020-7-22 17:27
Hi

The trigger for serial decoding only appears on the RHS of display in trigger node, trigger drop ...

You can directly select the decoding function in the list above. The decoding function was added later and did not appear in the trigger setup. It should be a bug. I will report it to the engineer for modification. Currently you can use it normally.

wangshuang · Post time 2020-7-28 10:01:24

QMESAR replied at 2020-7-24 00:11
Please be so kind and inform us on this thread when you have modified the Software that the Seria ...

ok, I will.