Hantek6254BC IIC (I2C) decoding

QMESAR · Post time 2020-7-17 21:46:19

Hi Hantek Team.
I have an 6254BD is it possible to have IIC decoding ? if I understand this post correctly if I do the FPGA update it should work or am I wrong
Thank you for your attention

QMESAR · Post time 2020-7-21 13:32:23

Hi.
Thank you for the information,
Questions
(1) If I do the FPGA update where in the PC Software do I select Serial/IIC decoding ?
(2) is SW V2.2.6 the latest Verion doesit support the IIC decoding

Thank you

QMESAR · Post time 2020-7-21 15:34:44

Edited by QMESAR at 2020-7-21 15:37

I would expect the I2C to be under the Trigger setup but with me there is nothing,
I have successfully done the FPGA upgrade

QMESAR · Post time 2020-7-22 09:50:52

Hi.

I did install the latest version of the SW before I did the upgrade ,I just did a new download from your link and installed the SW again No IIC option

Please help Thank you

QMESAR · Post time 2020-7-22 20:35:50

Hi Guys ,

A big thank you to both of you, I found it and happy this was something that was always missing in the HANTEK scopes now it is there
Great Stuff

QMESAR · Post time 2020-7-24 00:11:42

It should be a bug. I will report it to the engineer for modification.

Please be so kind and inform us on this thread when you have modified the Software that the Serial decoders are also shown in the main trigger window

Thank you very much

QMESAR · Post time 2020-8-18 16:09:50

Hi Team
Any update on this !

Regards

Hantek6254BC IIC (I2C) decoding

This post contains more resources

This post contains more resources