DSO5102P recover not working

cnetrwal

Hi

I've not used the oscilloscope for months and now it hang on error screen.

I tried the recovery but this fails. On the serial console I found out that the recovery
failes on restoring the root filesystem with an tar  error.

I checke  the rootfs.tar.bz:

1. [root@Hantek ~]#bunzip2 -t < /recover/rootfs/rootfs.tar.bz
   
2. bunzip2: CRC error
   
3. [root@Hantek ~]#
   

Copy the Code

I can't find a methode to fix this problem without  loosing any  data.
can anyone send me a rootfs.tar.bz for for the DSO5102P
Thanks
Christian

amy

Please refer to the attachment to operate and upload the print information.

arra

Hi,
Does anyone still have the fix for the issue in this topic? I haven't used my scope for 8 months and now it won't boot, also recovery fails.
Thank you in advance

wangshuang

Tylerebowers replied at 2021-3-13 00:14
I have the same situation and need the same files. Please help, Thanks

Is there any problem with the oscilloscope? You can email me/
wangshuang@hantek.com

Tylerebowers

wangshuang replied at 2020-8-29 14:21
https://fil.email/F3J2jHio
The files are in the recover_burn_dso_200624 folder.
Please follow the  ...

I have the same situation and need the same files. Please help, Thanks

BOBO4KA

Hello Wangshuang
I have the same problem but files you uploaded were erased. Can you please upload them one more time?

wangshuang

cnetrwal replied at 2020-8-26 04:40
Hi
only recover_burn_dso_200624.up was in the downoad
no other files

https://fil.email/F3J2jHio
The files are in the recover_burn_dso_200624 folder.
Please follow the previous instructions.

cnetrwal

Hi
only recover_burn_dso_200624.up was in the downoad
no other files
Please send me the complete set
Thanks

wangshuang

cnetrwal replied at 2020-8-5 16:29
Hi

restoring recovery  partition was working, but i get the same error during recovery

1. Please confirm three files in the usb flash drive.2. The upgrade process takes about 2-3 mins.
3. After the upgrade, the oscillosope will boot on normally. Normal partition working.
Just ignore the recovery partition now. Recovery partition need to be recovered after normal partition working.

cnetrwal

Hi

restoring recovery  partition was working, but i get the same error during recovery
because of    bunzip2 CRC error for /recover/rootfs/rootfs.tar.bz

so the DSO5102P is still unusable
Please help !

wangshuang

cnetrwal replied at 2020-7-22 13:22
Hi wangshuang
Thanks for the answer. Unfortunatly I was on vacation and  have seen your replay to  ...

https://fil.email/uzgoPk9q