Hantek 6204BD does not work.

felishaus · Post time 2020-5-21 05:06:26

Hello. I am having a problem with the Hantek 6204BD. When connected to a PC, it is defined in the device manager as Hantek 6000B but the software Hantek-6000 ver 2.2.5 does not see the oscilloscope (connection indicator is gray). On the oscilloscope panel, the red LED does not blink. I tried to connect on Windows 10 and Windows 7.

wangshuang · Post time 2020-5-21 11:54:54

When connected to PC, did you use all black and red USB cable? Does the 6000B in device manager has a yellow "!", you need to update a corresponding driver manually.
Download link:
http://hantek.com/en/ProductDetail_2_10164.html

felishaus · Post time 2020-5-21 12:50:58

When connecting, I use 2 cables red and black. The device manager displays normally without a "!" I reinstalled the driver and software many times.

amy · Post time 2020-5-25 14:11:01

Please connect a 5V@2A adapter to the red USB connector as auxiliary power supply.
Can solve your problem？

felishaus · Post time 2020-5-28 22:15:04

I tried to connect with an additional power source (5v 2a) unfortunately it did not work.

Below are screenshots of the device manager software and front panel.

felishaus · Post time 2020-5-29 18:17:45

Reload fffffffffggghhhhh

amy · Post time 2020-6-5 11:49:40

Please refer to the attachment to update the FPGA to try.

Hantek 6204BD does not work.

This post contains more resources

This post contains more resources

This post contains more resources