DSO4204C Function generator disabled after firmware upgrade

NoName · Post time 2020-5-26 23:08:49

wangshuang replied at 2020-5-21 16:03
I have reply your email, please view and reply.

I have exacltly the same problem, this firmware is bad!

It has now broken my DSO4254C and made it an DSo4254B

Yes I did use the correct firmware, can someone please give me way to fix this fault!

wangshuang · Post time 2020-5-21 16:03:32

I have reply your email, please view and reply.

wirh968h1tdw · Post time 2020-5-21 03:16:53

Tried again with same result.

https://imgur.com/a/UuZtuE4

wirh968h1tdw · Post time 2020-5-20 10:24:48

I did use that firmware, the model number does not update and the function generator still doesn't work. What else can be done?

wangshuang · Post time 2020-5-20 10:20:38

The firmware you used is wrong, please use the firmware upgrade in the link.

wirh968h1tdw · Post time 2020-5-20 10:07:04

Edited by wirh968h1tdw at 2020-5-20 10:10

Doesn't work. It updates the firmware but the model number and serial number do not revert back to the correct numbers and the function generator remains non-functional.

wangshuang · Post time 2020-5-20 09:48:09

Please download correct firmware to update on this page.
http://hantek.com/en/ProductDetail_3_12167.html