Please select To the mobile version | Continue to access the desktop computer version

Electronic Engineer Discuss

View: 1323|Reply: 6

Hantek 2d42 calibration

[Copy link]

1

Threads

9

Posts

9

Credits

新手上路

Rank: 1

Credits
9
Post time 2020-4-23 02:24:16 | Show all posts |Read mode
Hi all. Is there a way to force a scope channel offset (as a calibration) ?

Scope switched on for a few minutes, run "Calibration" from menu and, at the end of the process, CH1 GND coupled is not aligned with its 0 reference (see attachment). CH2 is perfectly 0 aligned.What can I do ?


This post contains more resources

You have to Login for download or view attachment(s). No Account? Register

x
Reply

Use magic Report

1

Threads

9

Posts

9

Credits

新手上路

Rank: 1

Credits
9
 Author| Post time 2020-4-24 14:10:48 | Show all posts



Hi there. No one with the same issue or (better) a possible solution ?

0

Threads

3

Posts

3

Credits

新手上路

Rank: 1

Credits
3
Post time 2020-5-3 16:34:12 | Show all posts
Edited by Rado at 2020-5-3 16:36

Hi I have the same problem, I'm trying to solvi it from more than a month! Aliexpres send me refund , the seller says there is no problem , but for me it is problem! I try everithing they sen to me latest firmware but the problem is still present! There is video https://www.youtube.com/watch?v=5kbehOV4-dE&t=42s

28

Threads

1593

Posts

1754

Credits

版主

Rank: 7Rank: 7Rank: 7

Credits
1754
Post time 2020-5-25 14:01:55 | Show all posts
Please scan the QR code on the back of the oscilloscope to download the latest software and install, and now use the "Checkupdate" to update the firmware.
Hope to solve your problem.

1

Threads

9

Posts

9

Credits

新手上路

Rank: 1

Credits
9
 Author| Post time 2020-6-3 20:47:50 | Show all posts
amy replied at 2020-5-25 14:01
Please scan the QR code on the back of the oscilloscope to download the latest software and install, ...

Hi Amy, something happened.
After updating FW and FPGA as you wrote and automatica calibration, the Gnd coupling is correctly aligned to 0, while DC and AC coupling always has an offset.
Please, look at the attached pictures.

This post contains more resources

You have to Login for download or view attachment(s). No Account? Register

x

28

Threads

1593

Posts

1754

Credits

版主

Rank: 7Rank: 7Rank: 7

Credits
1754
Post time 2020-6-17 16:55:18 | Show all posts
Sorry to reply you so late.
Please check whether there is the offset when the time base is 1us, DC and AC coupling.

0

Threads

12

Posts

12

Credits

新手上路

Rank: 1

Credits
12
Post time 2020-6-18 20:51:55 | Show all posts
My 2C42 has exactly the same problem.
https://youtu.be/LusruVUlZxc






You have to log in before you can reply Login | Register

Points Rules

QQ|Dark room|Mobile|Archiver|Electronic Engineer Discuss

2020-8-15 10:22 GMT+8 , Processed in 0.390522 second(s), 22 queries .

Powered by Discuz! X3.2

© 2001-2013 Comsenz Inc.

Quick Reply To Top Return to the list