How to do mainboard programming via USB?

WisdomAugust · Post time 2020-4-15 08:54:46

Install and configure tool SecureCRT

Unzip “SecureCRT.rar” in the file.

Double click “SecureCRT.exe”

Click “OK”.

WisdomAugust · Post time 2020-4-16 08:26:37

Select “Yes”.

Configure as follows:

WisdomAugust · Post time 2020-4-17 08:10:36

According to your device, select the “com” in Port Item, click “Connect”.

If this interface appears, it means the connection is successful.

WisdomAugust · Post time 2020-5-6 08:08:29

Check

1. Connect the device serial port (J801) to PC RS232 port or USB port via RS232 to TTL module or

USB to TTL module.

WisdomAugust · Post time 2020-5-7 08:07:48

2. Power on. If there isn't any in the serial interface, execute 2.3~2.6. If there will be some terminal

output in the serial interface, please send the output content to the customer service personnel to

get the subsequent operation instructions.

WisdomAugust · Post time 2020-5-7 08:07:48

Edited by WisdomAugust at 2020-5-8 09:41

Install hjtag Tools and Program ***.bin

Add equipment giveio

Unzip GIVEIO.rar file in programming tools. Copy the content in GIVIO folder into driver path of system partition:

C:\WINDOWS\system32\drivers

WisdomAugust · Post time 2020-5-9 08:56:16

Open Control Panel of the computer.

Select the “Add Hardware” option.

Select “Next”.

Select “yes”, click “next”.

Select “Add new hardware equipment”, click “next”.

Select “Install manual list choosing hardware”, click “next”.

Select “Port COM and IPT”, click “next”.

Select “Install from disk”.

Click “Review”.

Select unzipped GIVIEIO.inf file from the dialog box and open it.

Click “Confirm”.

Click “Next”.

Click “Finish”.

WisdomAugust · Post time 2020-5-11 08:54:27

Install and configure hjtag software
Unzip H-JTAG V3.0 RELEASE.rar file.

Double click H-JTAG V3.0 RELEASE.EXE in the unzipped folder.

WisdomAugust · Post time 2020-5-12 10:12:56

Click “Next”.

Select “I agree with….” option, click “Next”.

Select destination folder of installation, click “Next”.

WisdomAugust · Post time 2020-5-13 09:44:13

Waiting for installation.

Click “Finish” to finish the installation, there would be a shortcut of software produced on the desktop.