Please select To the mobile version | Continue to access the desktop computer version

Electronic Engineer Discuss

View: 1781|Reply: 4

Problem with new Hantek 2D82

[Copy link]

1

Threads

3

Posts

3

Credits

新手上路

Rank: 1

Credits
3
Post time 2020-1-26 19:50:07 | Show all posts |Read mode
Edited by Sapp at 2020-1-26 20:56

Hello, i bought a new Hantek 2D82Auto and get it yesterday.After a short view to funktions suddenly the normal english words on display changed to anything not readable . So have a look tot he picture. Then i want connect the device to my notebook to check the connection with the hantek software and or look for a new firmware, but my computer do not found any device. And if i tryto start the device with an a usb cable connectet the device will not start.





This post contains more resources

You have to Login for download or view attachment(s). No Account? Register

x
Reply

Use magic Report

1

Threads

3

Posts

3

Credits

新手上路

Rank: 1

Credits
3
 Author| Post time 2020-1-27 01:53:34 | Show all posts
Ok, now i was in able to start the update mode without batteries and update the 2d82 and it looks like everything in fine now. Hope it keeps so


0

Threads

1

Posts

1

Credits

新手上路

Rank: 1

Credits
1
Post time 2020-2-6 02:32:47 | Show all posts
Sapp replied at 2020-1-27 01:53
Ok, now i was in able to start the update mode without batteries and update the 2d82 and it looks li ...

same problem , can you help me please with the update procedure

1

Threads

3

Posts

3

Credits

新手上路

Rank: 1

Credits
3
 Author| Post time 2020-2-11 01:53:55 | Show all posts
You should download all tools and software for the item. Then install the software and read all the informations to do the update. Especially you have to take out the batterys bevor start the update. In my case only an old Tinkpad T400 detected the Hantek on usb port.

28

Threads

1602

Posts

1763

Credits

版主

Rank: 7Rank: 7Rank: 7

Credits
1763
Post time 2020-2-14 16:56:38 | Show all posts
dgtall replied at 2020-2-6 02:32
same problem , can you help me please with the update procedure

Connect the scope to your computer and click About->CheckUpdate, and follow the prompts to operate.


This post contains more resources

You have to Login for download or view attachment(s). No Account? Register

x
You have to log in before you can reply Login | Register

Points Rules

QQ|Dark room|Mobile|Archiver|Electronic Engineer Discuss

2020-9-24 18:12 GMT+8 , Processed in 0.307808 second(s), 22 queries .

Powered by Discuz! X3.2

© 2001-2013 Comsenz Inc.

Quick Reply To Top Return to the list