Please select To the mobile version | Continue to access the desktop computer version

Electronic Engineer Discuss

123Next
Return to list New
View: 209|Reply: 20

How to Use the Modulated Waveform Function of HDG6000B?

[Copy link]

45

Threads

572

Posts

652

Credits

高级会员

Rank: 4

Credits
652
Post time 2019-10-21 08:11:47 | Show all posts |Read mode
How to Use the Modulated Waveform Function of HDG6000B?



This post contains more resources

You have to Login for download or view attachment(s). No Account? Register

x
Reply

Use magic Report

45

Threads

572

Posts

652

Credits

高级会员

Rank: 4

Credits
652
 Author| Post time 2019-10-22 08:12:00 | Show all posts
To Output a Modulated Waveform


A modulated waveform consists of a carrier and a modulating waveform. In AM (amplitude modulation),
the amplitude of the carrier is varied by the amplitude of the modulating waveform. For this example, you
will output an AM waveform with 80% modulation depth. The carrier will be a 5 kHz sine wave and the
modulating waveform will be a 200 Hz sine wave.



AM waveform display on oscilloscope


This post contains more resources

You have to Login for download or view attachment(s). No Account? Register

x

45

Threads

572

Posts

652

Credits

高级会员

Rank: 4

Credits
652
 Author| Post time 2019-10-23 08:12:25 | Show all posts
1 Select the function, frequency, and amplitude of the carrier.
Press Sine key and then press the Freq, Ampl, and Offset softkeys to configure the carrier waveform.
For this example, select a 5 kHz sine wave with an amplitude of 5 Vpp.



This post contains more resources

You have to Login for download or view attachment(s). No Account? Register

x

45

Threads

572

Posts

652

Credits

高级会员

Rank: 4

Credits
652
 Author| Post time 2019-10-24 08:06:33 | Show all posts
2 Select AM.
Press Mod key and then select “AM” using the Type softkey.
3 Set the modulation depth.
Press the AM Depth softkey and then set the value to 80% using the numeric keypad or the knob and
cursor keys.
4 Set the modulating frequency.
Press the AM Freq softkey and then set the value to 200 Hz using the numeric keypad or the knob and
cursor keys.


45

Threads

572

Posts

652

Credits

高级会员

Rank: 4

Credits
652
 Author| Post time 2019-10-25 09:32:01 | Show all posts
5 Select the modulating waveform shape.
Press the Shape softkey to select the shape of the modulating waveform.
For this example, select a sine wave.



At this point, the function generator outputs an AM waveform with the specified modulation parameters
(if the output is enabled).


This post contains more resources

You have to Login for download or view attachment(s). No Account? Register

x

45

Threads

572

Posts

652

Credits

高级会员

Rank: 4

Credits
652
 Author| Post time 2019-10-26 08:18:22 | Show all posts
To Output an FSK Waveform
You can configure the function generator to “shift” its output frequency between two preset values using
FSK modulation. The rate at which the output shifts between the two frequencies (called the “carrier
frequency” and the “hop frequency”) is determined by the internal rate generator or the signal level on
the front-panel Trig connector. For this example, you will set the “carrier” frequency to 3 kHz and the
“hop” frequency to 500 Hz, with an FSK rate of 100 Hz.



This post contains more resources

You have to Login for download or view attachment(s). No Account? Register

x

45

Threads

572

Posts

652

Credits

高级会员

Rank: 4

Credits
652
 Author| Post time 2019-10-28 08:03:25 | Show all posts
1. Select the function, frequency, and amplitude of the carrier.
Press Sine key and then press the Freq, Ampl, and Offset softkeys to configure the carrier waveform.
For this example, select a 3 kHz sine wave with an amplitude of 5 Vpp.



This post contains more resources

You have to Login for download or view attachment(s). No Account? Register

x

45

Threads

572

Posts

652

Credits

高级会员

Rank: 4

Credits
652
 Author| Post time 2019-10-29 08:08:06 | Show all posts
2 Select FSK.
Press Mod key and then select “FSK” using the Type softkey.
3 Set the hop frequency.
Press the Hop Freq softkey and then set the value to 500 Hz using the numeric keypad or the knob and cursor keys.
4 Set the FSK shift rate.
Press the FSK Rate softkey and then set the value to 100 Hz using the numeric keypad or the knob and cursor keys.


At this point, the function generator outputs an FSK waveform (if the output is enabled).


This post contains more resources

You have to Login for download or view attachment(s). No Account? Register

x

45

Threads

572

Posts

652

Credits

高级会员

Rank: 4

Credits
652
 Author| Post time 2019-11-4 10:12:22 | Show all posts
To Output a PWM Waveform
You can configure the function generator to output a pulse width modulated (PWM) waveform. HDG6162B
provides PWM for square carrier waveforms, and PWM is the only type of modulation supported for Square
waveforms. In PWM, The pulse width of the carrier waveform varies with the voltage level of the modulating
waveform.
You can specify either a duty or a deviation to be controlled by the modulating waveform.
For this example, you will specify a deviation for a 1 kHz square waveform with a 100 Hz sine wave modulating
waveform.


45

Threads

572

Posts

652

Credits

高级会员

Rank: 4

Credits
652
 Author| Post time 2019-11-7 08:00:23 | Show all posts
1 Select the carrier waveform parameters.
Press Square key and then press the Freq, Ampl, Offset, Width, and Edge Time softkeys to configure
the carrier waveform. For this example, select a 1 kHz square waveform with an amplitude of 1 Vpp, a
zero offset, a phase of 0 degree, and a duty of 50%.



This post contains more resources

You have to Login for download or view attachment(s). No Account? Register

x
You have to log in before you can reply Login | Register

Points Rules

QQ|Dark room|Mobile|Archiver|Electronic Engineer Discuss

2019-11-23 05:21 GMT+8 , Processed in 0.264536 second(s), 22 queries .

Powered by Discuz! X3.2

© 2001-2013 Comsenz Inc.

Quick Reply To Top Return to the list