1008C driver install problem

OASJ2YSeeEhBQo1

That's a common problem with this series of oscilloscope, specially if you use the CD supplied to install it. Before trying to reinstall the driver, you need to completely remove the older files that are in the system. Try this:

1- Break, burn and trash that small CD that came with your scope, so nobody can ever use it again. Download the latest software and driver from the product page's: http://www.hantek.com/en/ProductDetail_13_13170.html

2- Open the Windows device Manager, click in View-> Show Hidden Devices. This will show all the drivers that are installed in your system.



3- Remove ALL drivers related to HANTEK1008C. Important: Make sure to tick the box asking to delete the files from the system:


4- Disconnect and connect the usb cable from the PC. When you see only the device YDJ-2088 in the device manager, select "update driver" to manually install it. Point the location where you extracted the drivers that you got in the first step.


If all was done correctly, the oscilloscope should work now.

OASJ2YSeeEhBQo1

I use this drivers, it works for me: https://mega.nz/#!DlUhzC4b!VXaS_ ... f9BUYRvNSoVxGsMQSAk

When you download the files, inside the folder "Driver" there are another two folders: "Others" and "Windows10". When manually installing the drivers, selected the correct folder according to your windows version.