Please select To the mobile version | Continue to access the desktop computer version

Electronic Engineer Discuss

View: 760|Reply: 3

Hantek 6022BL, button not working

[Copy link]

2

Threads

4

Posts

4

Credits

新手上路

Rank: 1

Credits
4
Post time 2019-8-25 00:40:55 | Show all posts |Read mode
Edited by tvellc at 2019-8-25 01:35

I have just started using the 6022BL unit. The oscilloscope works ok. But the P/H button, does nothing when I push it in or out. What is it for?



Reply

Use magic Report

28

Threads

1551

Posts

1712

Credits

版主

Rank: 7Rank: 7Rank: 7

Credits
1712
Post time 2019-8-28 16:33:48 | Show all posts
Please keep the key in H position. No need to change.

7

Threads

112

Posts

112

Credits

注册会员

Rank: 2

Credits
112
Post time 2019-8-31 06:18:17 | Show all posts
Leave the button pressed (H position) to use the oscilloscope with Hantek's USB driver and software. With the button in the position P (unpressed) the device will install the fx2 usb driver, then you can use the Saleae Logic software for the logic analyzer, it will be limited to 8ch only, but the Saleae software is much better than Hantek's.

Important! You need to unplug and plug again the device to the usb port every time you press the button for it to work.

https://www.youtube.com/watch?v=G5tFnaFK7qs

2

Threads

4

Posts

4

Credits

新手上路

Rank: 1

Credits
4
 Author| Post time 2019-10-7 05:27:33 | Show all posts
Thank you. This was the information I needed.
You have to log in before you can reply Login | Register

Points Rules

QQ|Dark room|Mobile|Archiver|Electronic Engineer Discuss

2020-2-24 10:48 GMT+8 , Processed in 0.519897 second(s), 21 queries .

Powered by Discuz! X3.2

© 2001-2013 Comsenz Inc.

Quick Reply To Top Return to the list