Please select To the mobile version | Continue to access the desktop computer version

Electronic Engineer Discuss

View: 8896|Reply: 9

DSO5102P

[Copy link]

1

Threads

7

Posts

7

Credits

新手上路

Rank: 1

Credits
7
Post time 2019-8-7 16:13:23 | Show all posts |Read mode
Good day. The oscilloscope has stopped responding to signals. Does not respond to the autoset button. I tried to flash on usb. Did not help. How to completely upgrade linux system.

Reply

Use magic Report

1

Threads

7

Posts

7

Credits

新手上路

Rank: 1

Credits
7
 Author| Post time 2019-8-8 01:37:42 | Show all posts
Here is a photo

This post contains more resources

You have to Login for download or view attachment(s). No Account? Register

x

1

Threads

7

Posts

7

Credits

新手上路

Rank: 1

Credits
7
 Author| Post time 2019-8-8 02:13:17 | Show all posts
Reply

Use magic Report

1

Threads

7

Posts

7

Credits

新手上路

Rank: 1

Credits
7
 Author| Post time 2019-8-8 02:14:04 | Show all posts

1

Threads

7

Posts

7

Credits

新手上路

Rank: 1

Credits
7
 Author| Post time 2019-8-9 00:52:31 | Show all posts
foto bootloader

This post contains more resources

You have to Login for download or view attachment(s). No Account? Register

x

167

Threads

2071

Posts

2232

Credits

版主

Rank: 7Rank: 7Rank: 7

Credits
2232
Post time 2019-8-12 11:05:17 | Show all posts
Sir, in your picture, the CH1 has waveform, but in your video, the CH1 doesn't have the waveform. I'm a little confused.
Please use the CH1 to measure the square the lower right corner of the scope, whether the oscilloscope display square wave.

1

Threads

7

Posts

7

Credits

新手上路

Rank: 1

Credits
7
 Author| Post time 2019-8-13 00:31:46 | Show all posts
good day. I hooked the shyyups to the internal generator. but nothing happens. The autoset button is not active. Channel select buttons also do not light. Previously, all buttons lit up when pressed. autoset also regularly calibrated the channel. but once turning on the oscilloscope everything stopped working. updating via usb did not help. It seems to me that it is necessary to completely reinstall the system.
I shot an extra video. here is the link.  https://yadi.sk/i/0hTaSlmZF5NKrA

167

Threads

2071

Posts

2232

Credits

版主

Rank: 7Rank: 7Rank: 7

Credits
2232
Post time 2019-8-13 14:19:45 | Show all posts
The hardware should be fault, please contact your seller to return factory for repair.

1

Threads

7

Posts

7

Credits

新手上路

Rank: 1

Credits
7
 Author| Post time 2019-8-13 17:06:34 | Show all posts
https://www.eevblog.com/forum/re ... 2036896/#msg2036896

The device was bought on aliexpress. I am in Russia. This is a problem for me. Most likely it will not work to send it back. I found the video on the Internet. man had the same problem. he eliminated it by flashing the system. I would also like to try.
Please send me the installation files for linux. I can install rs323 through the bootloader.

24

Threads

119

Posts

119

Credits

注册会员

Rank: 2

Credits
119
Post time 2019-8-14 00:29:01 | Show all posts
Edited by Oleg10011001 at 2019-8-14 00:30

Возможно поможет видеоролик: https://www.youtube.com/watch?v=ofO1WbJ3Z5o&t=31s .Там в описании видеоролика есть ссылка на использовавшиеся файлы.

You have to log in before you can reply Login | Register

Points Rules

Dark room|Mobile|Archiver|Electronic Engineer Discuss

2024-3-29 01:52 GMT+8 , Processed in 0.171004 second(s), 22 queries .

Powered by Discuz! X3.2

© 2001-2013 Comsenz Inc.

Quick Reply To Top Return to the list