Please select To the mobile version | Continue to access the desktop computer version

Electronic Engineer Discuss

View: 5872|Reply: 1

hantek 6254bd jitter, noise

[Copy link]

3

Threads

7

Posts

7

Credits

新手上路

Rank: 1

Credits
7
Post time 2019-8-3 07:06:22 | Show all posts |Read mode
There seems to be a lot of noise on the trace even when no probe is connected.  It is only a few mv, but they should be flat lines.  The same sort of jitter or noise shows up when the probe is connected to the square wave generator output on the front panel that is used to adjust the probe compensation.

Is this normal?  What are other people seeing

thanks,

vernonls
Reply

Use magic Report

167

Threads

2071

Posts

2232

Credits

版主

Rank: 7Rank: 7Rank: 7

Credits
2232
Post time 2019-8-6 15:07:57 | Show all posts
Sir, that is normal.
Oscilloscope itself has bottom noise.
You can use average acquisition mode to reduce the noise.
You have to log in before you can reply Login | Register

Points Rules

Dark room|Mobile|Archiver|Electronic Engineer Discuss

2024-3-28 17:02 GMT+8 , Processed in 0.156410 second(s), 21 queries .

Powered by Discuz! X3.2

© 2001-2013 Comsenz Inc.

Quick Reply To Top Return to the list