DSO4254C missing key reuse option

TMG · Post time 2019-6-23 15:19:13

Edited by TMG at 2019-6-23 15:15

Hi

SW:1.1.2(190326.0)
HW:501.001.001.000.000.000.000.000
FPGA: a005
USB pendrive is connected and correctly detected.

In menu Display should be option Key Reuse (acc. to user manual) but in this SW this option is not available. Why?
Can I save picture using one button?

I know that is possible to use Save/Recal menu but then some information is overshadowed by menu.

Thanks for you answer.

amy · Post time 2019-6-26 09:05:17

You can try to long press Save/Recall rutton to save the screenshot.

TMG · Post time 2019-6-28 05:00:07

Edited by TMG at 2019-6-28 05:03

Thanks for that hint. It's working.

However information about already saved picture is not correctly displayed.

amy · Post time 2019-6-28 13:23:37

Do you mean the question of the marker's location?

Did it appear on the screen after the picture was saved successfully?

TMG · Post time 2019-6-28 21:45:28

Yes, that is right. This is appear after saving file. Just after progress bar. This is information about file name but is not readable.

amy · Post time 2019-7-1 14:48:27

I have feedback our engineer. Please wait for a while.

hoaoaihuong · Post time 2019-7-1 15:01:40

In menu Display should be option Key Reuse (acc. to user manual) but in this SW this option is not available. Why?
Can I save picture using one button?
I know that is possible to use Save/Recal menu but then some information is overshadowed by menu.
Thanks for you answer.

amy · Post time 2019-7-9 15:20:13

Please download the firmware in this link to update.

http://hantek.com/en/ProductDetail_3_12167.html

TMG · Post time 2019-7-10 05:04:33

Hi Amy

After firmware update file name is displayed correctly.

Thanks

DSO4254C missing key reuse option

This post contains more resources

This post contains more resources