DSO5202B firmware updates fail with 0xfe

dgScope · Post time 2019-5-16 08:28:57

Edited by dgScope at 2019-5-18 04:50

I’ve tried upgrading the firmware on my DSO5202B using the files below, and both resulted in 0xfe errors (no update file found).

dso5kb_func_dso5202b20140610.up

dso5kb_func_dso5202b20180226.up

These firmware files were obtained from the Hantek website and the Hantek OneDrive account.

I tried multiple FAT32-formatted 1GB USB flash drives. The flash drives are otherwise operational with the scope. I can save waveforms and screenshots to USB ok. I've reformatted so the only file present is the firmware up file. No luck.

Any help would be appreciated.

Scope S/N: T 1G/200M 033099

SW version: 2.06.3 (130814.1)

HW version: 0x555583e9

Thanks

aruschel · Post time 2021-4-5 22:30:38

Slash200 replied at 2020-2-4 03:54
Dear Amy,
I have the same problem.
Model: DSO5202B

My friend, I had the same problem and decided to change the pendrive, put a different brand that is certainly the problem. Follow a link in Spanish explaining well what I said above.

https://www.youtube.com/watch?v=qXLTHLb961Q

aruschel · Post time 2021-4-5 22:28:38

My friends, I had the same problem and decided to change the pendrive, put a different brand that is certainly the problem. Follow a link in Spanish explaining well what I said above.

https://www.youtube.com/watch?v=qXLTHLb961Q

aruschel · Post time 2021-4-5 22:27:48

JSP40 replied at 2020-5-7 14:10
Hi this is my system information window:

model: DSO5202P

My friend, I had the same problem and decided to change the pendrive, put a different brand that is certainly the problem. Follow a link in Spanish explaining well what I said above.

https://www.youtube.com/watch?v=qXLTHLb961Q

gustavosmk · Post time 2021-3-9 03:17:38

Hello Amy,

I have the same problem too. But my firmware is quite older:
Model DSO5202B
soft version 2.05.0
hard version 0x555583e8

wangshuang · Post time 2020-7-15 08:42:39

dg:Scope replied at 2020-7-14 19:50
Is there any newer firmware than 2.06.3(140924.0) for DSO5202B running 2.06.3 Linux? (Newer than t ...

Please get the latest firmware in Hantek official website:
http://hantek.com.cn/products/detail/3

dg:Scope · Post time 2020-7-14 19:50:21

amy replied at 2019-5-25 16:28
Sir, the linux version of your scope is 2.06.3. The latest firmware is not suitable for it.
Please u ...

Is there any newer firmware than 2.06.3(140924.0) for DSO5202B running 2.06.3 Linux? (Newer than the attached zip?)

Thanks.

JSP40 · Post time 2020-5-7 14:10:42

Hi this is my system information window:

model: DSO5202P
sw vversion: 3.40.0(180120.0)
hw version: 1010xffff8108
serial number: T 1G/138 044564
boot count: 55
upgrade count: 0
lcd.front.ts: 3.3.0

ying · Post time 2020-5-6 13:26:59

JSP40 replied at 2020-5-3 23:37
my oscilloscope can use the usb, read and record graphics on it. the usb format is correct in my ca ...

Please press "Utility->System Information" button and send us a screenshot to study.

JSP40 · Post time 2020-5-3 23:37:22

my oscilloscope can use the usb, read and record graphics on it. the usb format is correct in my case