Please select To the mobile version | Continue to access the desktop computer version

Electronic Engineer Discuss

12Next
Return to list New
View: 2620|Reply: 12

DSO5202B firmware updates fail with 0xfe

[Copy link]

1

Threads

2

Posts

2

Credits

新手上路

Rank: 1

Credits
2
Post time 2019-5-16 08:28:57 | Show all posts |Read mode
Edited by dgScope at 2019-5-18 04:50

I’ve tried upgrading the firmware on my DSO5202B using the files below, and both resulted in 0xfe errors (no update file found).  

dso5kb_func_dso5202b20140610.up
dso5kb_func_dso5202b20180226.up

These firmware files were obtained from the Hantek website and the Hantek OneDrive account.

I tried multiple FAT32-formatted 1GB USB flash drives.  The flash drives are otherwise operational with the scope.  I can save waveforms and screenshots to USB ok.  I've reformatted so the only file present is the firmware up file.  No luck.

Any help would be appreciated.

Scope S/N: T 1G/200M 033099
SW version: 2.06.3 (130814.1)
HW version: 0x555583e9

Thanks






Reply

Use magic Report

28

Threads

1581

Posts

1742

Credits

版主

Rank: 7Rank: 7Rank: 7

Credits
1742
Post time 2019-5-18 13:23:11 | Show all posts
Sir, your scope is too old, the new firmware is not suitable for it.
Please send a message to our email support@hantek.com

1

Threads

2

Posts

2

Credits

新手上路

Rank: 1

Credits
2
 Author| Post time 2019-5-21 05:16:51 | Show all posts
I did follow up with support@hantek.com and haven't received a response.

My question to Support is:  What’s the highest supported firmware version for the DSO5202B with hardware version (0x555583e9)?

Thanks.

28

Threads

1581

Posts

1742

Credits

版主

Rank: 7Rank: 7Rank: 7

Credits
1742
Post time 2019-5-25 16:28:12 | Show all posts
Edited by amy at 2020-2-14 10:02

Sir, the linux version of your scope is 2.06.3. The latest firmware is not suitable for it.
Please use this firmware to update.


Attention, if the firmware version number earlier than 2013, such as 120505.0 or 120825.0, please do not upgrade with this firmware.



This post contains more resources

You have to Login for download or view attachment(s). No Account? Register

x

0

Threads

1

Posts

1

Credits

新手上路

Rank: 1

Credits
1
Post time 2020-2-4 03:54:13 | Show all posts
Dear Amy,
I have the same problem.
Model: DSO5202B
SW: 2.06.3.(130425.0)
HW: 10070x555583e9
I can't update from the downloads from the hantek page.
Also your attached update shows me the error 0xfe
Can you please help me updating my DSO?

Thank you!
regards

28

Threads

1581

Posts

1742

Credits

版主

Rank: 7Rank: 7Rank: 7

Credits
1742
Post time 2020-2-14 09:58:42 | Show all posts
Slash200 replied at 2020-2-4 03:54
Dear Amy,
I have the same problem.
Model: DSO5202B

Sir, You can upgrade with the above firmware.

0

Threads

1

Posts

1

Credits

新手上路

Rank: 1

Credits
1
Post time 2020-3-10 01:22:43 | Show all posts
Hello Amy,

I have the same problem too. But my firmware is quite older:
Model: DSO5202B
SW: 2.06.3(120808.0)
HW: 10070x555583e9

What is the procedure to update my device?

28

Threads

1581

Posts

1742

Credits

版主

Rank: 7Rank: 7Rank: 7

Credits
1742
Post time 2020-3-13 16:33:36 | Show all posts
Sorry, there is no upgrade firmware suitable for your oscilloscope.

0

Threads

4

Posts

4

Credits

新手上路

Rank: 1

Credits
4
Post time 2020-5-1 15:59:35 | Show all posts

I have the same problem.
DSO5202P
Firmware update failed error 0xfe
No upgrade files detected on USB device

1

Threads

6

Posts

6

Credits

新手上路

Rank: 1

Credits
6
Post time 2020-5-3 21:40:52 | Show all posts
I had this problem before with files not visible.
I suspect the USB partition cannot be mounted because the drive capacity is too large.
I was able to use an old 512MB  USB stick successfully.

Can you try with a small capacity USB drive - or possibly create a small partition
if you do not have an older USB stick. Hope it works for you.   

( I am not from Hantek - just a user - so this is not official advice)

12Next
Return to list New
You have to log in before you can reply Login | Register

Points Rules

QQ|Dark room|Mobile|Archiver|Electronic Engineer Discuss

2020-7-4 20:53 GMT+8 , Processed in 0.523678 second(s), 22 queries .

Powered by Discuz! X3.2

© 2001-2013 Comsenz Inc.

Quick Reply To Top Return to the list