Please select To the mobile version | Continue to access the desktop computer version

Electronic Engineer Discuss

View: 302|Reply: 9

How to use the logic analyzer of MSO5202D?

[Copy link]

44

Threads

519

Posts

599

Credits

高级会员

Rank: 4

Credits
599
Post time 2019-5-14 09:06:10 | Show all posts |Read mode
There seems no key for logic analyzer on the front panel of MSO5202D.
How to enable the logic analyzer function?




This post contains more resources

You have to Login for download or view attachment(s). No Account? Register

x
Reply

Use magic Report

44

Threads

519

Posts

599

Credits

高级会员

Rank: 4

Credits
599
 Author| Post time 2019-5-15 08:55:49 | Show all posts
See the multifunctional key F7 above the VATICAL control?


Press F7 key twice to open the menu and display of logic analyzer.

Logic Analyzer Interface


This post contains more resources

You have to Login for download or view attachment(s). No Account? Register

x

44

Threads

519

Posts

599

Credits

高级会员

Rank: 4

Credits
599
 Author| Post time 2019-5-16 08:02:31 | Show all posts
Review the logic analyzer menu



This post contains more resources

You have to Login for download or view attachment(s). No Account? Register

x

44

Threads

519

Posts

599

Credits

高级会员

Rank: 4

Credits
599
 Author| Post time 2019-5-17 08:28:58 | Show all posts
1Display and Rearrange the Digital Channels

(1) Press F1 (D7-D0) or F2 (D15-D8) softkey to enter the channel group setup menu.



This post contains more resources

You have to Login for download or view attachment(s). No Account? Register

x

44

Threads

519

Posts

599

Credits

高级会员

Rank: 4

Credits
599
 Author| Post time 2019-5-20 09:18:30 | Show all posts
When Turn On D7-D0




When Turn Off D7-D0



This post contains more resources

You have to Login for download or view attachment(s). No Account? Register

x

44

Threads

519

Posts

599

Credits

高级会员

Rank: 4

Credits
599
 Author| Post time 2019-5-21 08:09:58 | Show all posts
When Size big, full screen to display 8 channels;
When size normal, full screen to display 16 channels.



This post contains more resources

You have to Login for download or view attachment(s). No Account? Register

x

44

Threads

519

Posts

599

Credits

高级会员

Rank: 4

Credits
599
 Author| Post time 2019-6-3 08:06:30 | Show all posts
(2) Press F3 (Current) softkey to enable the current channel selection function. Turn the V0 multifunction
knob to select digital channels. And the selected channel display in red.



This post contains more resources

You have to Login for download or view attachment(s). No Account? Register

x

44

Threads

519

Posts

599

Credits

高级会员

Rank: 4

Credits
599
 Author| Post time 2019-6-4 09:20:55 | Show all posts
2Setup the Threshold Type of the Digital Channels
(1) Press F4 (Threshold Type) softkey to select the pre-set threshold type or select the user-defined type to set your own threshold level.
Threshold type: TTL CMOS ECL User-defined
Threshold level changes between 2.6V 2.5V -1.3V -8V to +8V.
(2) When select User type threshold, the user sub-menu will appear.

Press F5 to enable the V0 knob to adjust the level value. And press V0 knob to zero the user value.


This post contains more resources

You have to Login for download or view attachment(s). No Account? Register

x

44

Threads

519

Posts

599

Credits

高级会员

Rank: 4

Credits
599
 Author| Post time 2019-6-5 08:15:55 | Show all posts
Logic Analyzer Flat Input Cable

MSO5102D logic signal input port is shown as follows:



This post contains more resources

You have to Login for download or view attachment(s). No Account? Register

x

44

Threads

519

Posts

599

Credits

高级会员

Rank: 4

Credits
599
 Author| Post time 2019-6-6 08:15:02 | Show all posts



A Digital Input Terminal
The total of digital signal input terminals is 18, arraged as two rows, GND, D0-D7 and
GND, D8-D15.
B Flat Cable Plug
Plug the flat cable into the logic signal input port in accordance with the sequence of the
input port.


Note: When connect with device, please insert input terminals gently to avoid damaging
cable socket or other components.


This post contains more resources

You have to Login for download or view attachment(s). No Account? Register

x
You have to log in before you can reply Login | Register

Points Rules

QQ|Dark room|Mobile|Archiver|Electronic Engineer Discuss

2019-7-21 16:26 GMT+8 , Processed in 0.466636 second(s), 22 queries .

Powered by Discuz! X3.2

© 2001-2013 Comsenz Inc.

Quick Reply To Top Return to the list