Hantek 6022BL Windows 10 driver installation fails with "Bad Image"

surbhi56

The registration process of TurboTax software involves some time. You need to fill up the online registration form completely.   Enter Turbotax License Code Online    would help you to prepare income tax returns. Thus, it is an effective way to manage your taxes. People mostly from Canada use this software to manage their taxation system. Therefore, Install turbotax with license code   is one of the critical software which everyone needs to use it. TurboTax is a software package developed to prepare Income   Installturbotax.com   Tax returns for Americans, so the process of tax returns is broken down and easily carried out. is tax preparation software for the Canadian tax returns.  turbotax.ca/download   The software offers a user-friendly interface for processing and electronic filing of tax returns for individuals and businesses.

surbhi56

If you’ve used any Intuit products before, like QuickBooks, Mint, or Lacerte Tax, you must be aware of its intuitive ease of service. turbotax.ca/download   Let's get started with the process to Install turbotax.com with the license code here. Turbotax.ca/download is a software package that helps you manage your income tax returns. Intuit produces it. Install turbotax with license code    It is one of the top software that allows you to control your income tax returns.  installturbotax.com with license code   Turbotax.ca/download offers four level products, viz. Basic, Deluxe, Premier and Self Employed.  installturbotax.com with license code   It is according to the desire of the user to choose one.

amy

And you can refer to last author in this post, he solve this problem by a reset of USB host controller and a diagnostic system reboot.
https://www.eediscuss.com/forum. ... p;extra=&page=3

amy

First, press H/P button to H position. If you can, please connact a adapter 5V@2A to the red connector of the usb cable. Second, connect the scope to your computer via the USB cable.
Pay attention to the sequence of operations.
And then open the device manager of your computer, right click the unknown device, select Properties.
And give me a screenshot of the Hardware ID as the following picture.

Robert2308

any driver which I downloads will not sucesse to update the driver foe Win 10. Please advise how do it?

Han

Sir,please wait,Hantek will try to solve your problem

raphidae

I did both the suggestions, and it doesn't work.

"Windows cannot load the device driver for this hardware. The driver may be corrupted or missing. (Code 39)

{Bad Image}
%hs is either not designed to run on Windows or it contains an error. Try installing the program again using the original installation media or contact your system administrator or the software vendor for support. Error status 0x"

I'm going to return it.

amy

First, press H/P button to H position, and now connect the scope to your computer via the USB cable.

And refer to this post to update the driver for windows10.
https://www.eediscuss.com/forum. ... tid=9012&extra=

OASJ2YSeeEhBQo1

As I already wrote many times (and you just noticed), Hantek's USB drivers are a mess. Try to do this: Open the Windows Device Manager and mark the option "Show hidden devices" in "View" menu and then remove all Hantek drivers that you see (when you are deleting a device form the list, make sure to check the option "uninstall driver").
Unplug an plug the device again to confirm that there is no driver left in the system. When you see only the yellow exclamation mark, download the latest drivers from Hantek and manually install the Win 10 driver (in the Windows Device manager right click on the device and select "update driver").
Also try to plug the device in a different USB port and make sure that both connectors of the USB cable (black and red) are plugged. Oh! and don't use any USB hub, I don't know why but hantek's USB drivers don't work through a hub, you'll get a blue screen and the computer will crash and reboot.


Regarding the button at the back, it is simple: keep it pressed (H position) to use the oscilloscope with Hantek's USB driver and software. With the button in the position P (unpressed) the device will use the fx2 usb driver, this way you can use the Saleae Logic software for the logic analyzer (limited to only 8ch but way better and much more useful than the original software). You need to unplug and plug the device again  to the usb port every time you press the button for it to work.
https://www.youtube.com/watch?v=G5tFnaFK7qs

raphidae

<remove> (double)