HANTEK DSO 5102P PASS / FAIL FUNCTION DOES NOT WORK IN THE RUSSIAN LANGUAGE

sergey42

The pass / fail function works only in English if I put the Russian language in the menu and turn on this function, the oscilloscope restarts

sergey42

Здравствуйте! а мне какую прошивку установить на мой НАNTEK DSO5102P ?

sergey42

Здравствуйте, обновил прошивку, скачал версию для hantek dso 5202p, теперь работает pass / fail,  на фотографии pic_1_1_LI.jpg нужно поменять местами (вкл.)(выкл.)--выкл. вверх а вкл.в низ,на других фотографиях перевести на русский язык где обведено красным .Заранее благодарен!

sergey42

Hello, updated the firmware, downloaded the version for hantek dso 5202p, pass / fail now works, could you still correct the errors with the translation on the photo pic_1_1_LI.jpg need to be swapped on and off in other photos where circled in red translated into Russian. thankful

sergey42

JIN64 replied at 2019-2-13 13:16
А что не правильного на pic_1_2_LI.jpg - pic_1_4.jpg ?
Сравнил с анг ...

Buttons that are circled in red need to be translated into Russian if possible, but it turns out to be one in Russian, others in English in the same menu and in the pic_1_1_LI.jpg swap

sergey42

JIN64 replied at 2019-2-27 18:27
They will not edit the firmware themselves. It is better to request a Russification file from them a ...

А у кого попросить файл русификации,куда написать на какой адрес ?

sergey42

amy replied at 2019-1-25 17:05
Sir, please download the latest firmware in this link: http://hantek.com/en/ProductDetail_3_26.ht ...

Hello Amy, Could you please send me the firmware Russification file HANTEK DSO 5202P, thanks in advance!